Asus Chromebook C200Ma Ds01 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          10 - 20 minutes            

Sections

3

• Back Panel
• 3 steps
• Battery Connection
• 1 step
• Motherboard
• 7 steps

Flags

0

• BackASUS Chromebook C200MA DS01

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Before proceeding, power down your Chromebook. Close the display and lay it on a soft surface, top-side down.
• Remove the five 8.4 mm Phillips #0 screws.
• Remove the four 4.6 mm Phillips #0 screws.

Before proceeding, power down your Chromebook. Close the display and lay it on a soft surface, top-side down.

Remove the five 8.4 mm Phillips #0 screws.

Remove the four 4.6 mm Phillips #0 screws.

1024

Step 2

• Use the plastic opening tool to gently work around the edge of the Chromebook until the back panel starts to lift off.

Use the plastic opening tool to gently work around the edge of the Chromebook until the back panel starts to lift off.

Step 3

• Remove the back panel by lifting it away from the Chromebook.
• Some clicking will be heard as the panel is removed from the back, this is completely normal.

Remove the back panel by lifting it away from the Chromebook.

Some clicking will be heard as the panel is removed from the back, this is completely normal.

Step 4

              Battery Connection               

• To disconnect the battery, pinch the multi-color bundle cable with your thumb and forefinger and pull directly back.

To disconnect the battery, pinch the multi-color bundle cable with your thumb and forefinger and pull directly back.

Step 5

              Motherboard               

• Disconnect the USB board ZIF (zero insertion force) connector located towards the bottom left of the motherboard.
• Flip the ZIF connector retaining flap up using either a spudger or your fingers.
• Pull gently on the ribbon cable to disconnect it from the motherboard.

Disconnect the USB board ZIF (zero insertion force) connector located towards the bottom left of the motherboard.

Flip the ZIF connector retaining flap up using either a spudger or your fingers.

Pull gently on the ribbon cable to disconnect it from the motherboard.

Step 6

• Disconnect the large keyboard and small touchpad ZIF connectors, both located in the middle of the bottom edge of the motherboard.
• Flip both ZIF retaining flaps up using either a spudger or your fingers.
• Gently pull on each ribbon cable to disconnect them from the motherboard.

Disconnect the large keyboard and small touchpad ZIF connectors, both located in the middle of the bottom edge of the motherboard.

Flip both ZIF retaining flaps up using either a spudger or your fingers.

Gently pull on each ribbon cable to disconnect them from the motherboard.

Step 7

• Disconnect the speaker’s black bundled cable connector (the cable is white, black and red).
• Pinch the black bundled cable connector between your thumb and pointer finger and pull.

Disconnect the speaker’s black bundled cable connector (the cable is white, black and red).

Pinch the black bundled cable connector between your thumb and pointer finger and pull.

Step 8

• Disconnect the screen cable connector located towards the top right of the motherboard.
• Using a spudger, gently pry up the sides of the connector.
• Pull off the connector with your hands.

Disconnect the screen cable connector located towards the top right of the motherboard.

Using a spudger, gently pry up the sides of the connector.

Pull off the connector with your hands.

Step 9

• Disconnect the black and white antenna cable connectors for the WiFi card. The connectors look like small buttons on the ends of colored wires.
• Gently pry the cable connectors off with your fingers or a spudger.
• These connections are button-like and will have a little resistance when removing.

Disconnect the black and white antenna cable connectors for the WiFi card. The connectors look like small buttons on the ends of colored wires.

Gently pry the cable connectors off with your fingers or a spudger.

These connections are button-like and will have a little resistance when removing.

Step 10

• Remove the eight Phillips #0 4.7 mm screws.
• Remove the Phillips #0 3.7 mm screw.
• Remove the Phillips #0 2.8 mm screw.

Remove the eight Phillips #0 4.7 mm screws.

Remove the Phillips #0 3.7 mm screw.

Remove the Phillips #0 2.8 mm screw.

Step 11

• Lift the motherboard from the Chromebook.

Lift the motherboard from the Chromebook.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Christopher Lim                     

Member since: 04/26/2017

779 Reputation

                                      7 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team S23-G4, Livingston Spring 2017                        

                                                  Member of Cal Poly, Team S23-G4, Livingston Spring 2017 



                    CPSU-LIVINGSTON-S17S23G4                     


                                            4 Members                     


                                            19 Guides authored