Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes

Sections

3

  • Back Panel
  • 3 steps
  • Battery Connection
  • 1 step
  • Wireless Card
  • 3 steps

Flags

0

  • BackASUS Chromebook C200MA DS01

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Before proceeding, power down your Chromebook. Close the display and lay it on a soft surface, top-side down.
  • Remove the five 8.4 mm Phillips #0 screws.
  • Remove the four 4.6 mm Phillips #0 screws.

Before proceeding, power down your Chromebook. Close the display and lay it on a soft surface, top-side down.

Remove the five 8.4 mm Phillips #0 screws.

Remove the four 4.6 mm Phillips #0 screws.

1024

Step 2

  • Use the plastic opening tool to gently work around the edge of the Chromebook until the back panel starts to lift off.

Use the plastic opening tool to gently work around the edge of the Chromebook until the back panel starts to lift off.

Step 3

  • Remove the back panel by lifting it away from the Chromebook.
  • Some clicking will be heard as the panel is removed from the back, this is completely normal.

Remove the back panel by lifting it away from the Chromebook.

Some clicking will be heard as the panel is removed from the back, this is completely normal.

Step 4

              Battery Connection
  • To disconnect the battery, pinch the multi-color bundle cable with your thumb and forefinger and pull directly back.

To disconnect the battery, pinch the multi-color bundle cable with your thumb and forefinger and pull directly back.

Step 5

              Wireless Card
  • Remove the silver 2.8 mm Phillips #0 screw from the wireless card.

Remove the silver 2.8 mm Phillips #0 screw from the wireless card.

Step 6

  • Use a spudger to disconnect the white and black antenna cables connected to the wireless card.

Use a spudger to disconnect the white and black antenna cables connected to the wireless card.

Step 7

  • Grab the wireless card between your thumb and index finger and pull directly away from the motherboard.

Grab the wireless card between your thumb and index finger and pull directly away from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Christopher Lim

Member since: 04/26/2017

779 Reputation

                                      7 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team S23-G4, Livingston Spring 2017                        

                                                  Member of Cal Poly, Team S23-G4, Livingston Spring 2017 



                    CPSU-LIVINGSTON-S17S23G4                     


                                            4 Members                     


                                            19 Guides authored