Difficulty
Moderate
Steps
8
Time Required
25 minutes
Sections
3
- Keyboard
- 5 steps
- Metal Plate
- 1 step
- Battery
- 2 steps
Flags
0
BackAsus Chromebook C201PA-DS02-LG
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Use a metal spudger to pry off the two feet closest to the hinge of the laptop.
- The feet are attached to the laptop by adhesives, therefore they may not stick as well after multiple removals.
Use a metal spudger to pry off the two feet closest to the hinge of the laptop.
The feet are attached to the laptop by adhesives, therefore they may not stick as well after multiple removals.
1024
Step 2
- Use a Phillips #0 screwdriver to unscrew the six 5mm screws.
- Use a Phillips #0 screwdriver to unscrew the two 6mm screws.
Use a Phillips #0 screwdriver to unscrew the six 5mm screws.
Use a Phillips #0 screwdriver to unscrew the two 6mm screws.
Step 3
- Use a plastic opening tool to pry the keyboard off the edges of the computer.
- The edges will make a popping noise.
Use a plastic opening tool to pry the keyboard off the edges of the computer.
The edges will make a popping noise.
Step 4
- Flip up the white bar that connects the thin white strip using a plastic opening tool.
- Grab the thin white strip and pull straight back to remove the strip from the connector.
Flip up the white bar that connects the thin white strip using a plastic opening tool.
Grab the thin white strip and pull straight back to remove the strip from the connector.
Step 5
- Use a plastic opening tool to lift the black bar above the wide black strip in the connector.
- Grab the wide black strip and pull straight back to remove the strip from the connector.
- Remove the keyboard by lifting it straight up.
Use a plastic opening tool to lift the black bar above the wide black strip in the connector.
Grab the wide black strip and pull straight back to remove the strip from the connector.
Remove the keyboard by lifting it straight up.
Step 6
Metal Plate
- Unscrew the seven 4mm screws using a Phillips #0 screwdriver.
- Wiggle the plate back and forth to loosen the adhesive under the plate.
- The adhesive will not be the same after removal and more adhesive may be necessary upon reassembly.
- Rotate the screwdriver in a counterclockwise direction to remove the screws.
- Do not rest your arm or hand in the adhesive.
Unscrew the seven 4mm screws using a Phillips #0 screwdriver.
Wiggle the plate back and forth to loosen the adhesive under the plate.
The adhesive will not be the same after removal and more adhesive may be necessary upon reassembly.
Rotate the screwdriver in a counterclockwise direction to remove the screws.
Do not rest your arm or hand in the adhesive.
Step 7
Battery
- Use a Phillips #0 screwdriver to unscrew the 4mm screws. Rotate the screwdriver in a counterclockwise direction to undo the screws.
- Remove the rainbow connector by firmly grasping the rainbow wires and pulling straight back. It will help to brace the motherboard when you pull.
Use a Phillips #0 screwdriver to unscrew the 4mm screws. Rotate the screwdriver in a counterclockwise direction to undo the screws.
Remove the rainbow connector by firmly grasping the rainbow wires and pulling straight back. It will help to brace the motherboard when you pull.
Step 8
- Use the plastic opening tool to lift up the battery and remove it.
- Do not dispose of the battery in normal waste. The chemicals inside are toxic. Find out where to dispose of properly in your neighborhood.
Use the plastic opening tool to lift up the battery and remove it.
Do not dispose of the battery in normal waste. The chemicals inside are toxic. Find out where to dispose of properly in your neighborhood.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Ashley Humpal
Member since: 04/18/2018
185 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Cal Poly, Team S17-G4, Livingston Spring 2018
Member of Cal Poly, Team S17-G4, Livingston Spring 2018
CPSU-LIVINGSTON-S18S17G4
4 Members
12 Guides authored
