Difficulty

Easy

Steps

6

Time Required

                          5 minutes

Sections

2

  • Keyboard
  • 5 steps
  • Metal Plate
  • 1 step

Flags

0

  • BackAsus Chromebook C201PA-DS02-LG

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • Use a metal spudger to pry off the two feet closest to the hinge of the laptop.
  • The feet are attached to the laptop by adhesives, therefore they may not stick as well after multiple removals.

Use a metal spudger to pry off the two feet closest to the hinge of the laptop.

The feet are attached to the laptop by adhesives, therefore they may not stick as well after multiple removals.

1024

Step 2

  • Use a Phillips #0 screwdriver to unscrew the six 5mm screws.
  • Use a Phillips #0 screwdriver to unscrew the two 6mm screws.

Use a Phillips #0 screwdriver to unscrew the six 5mm screws.

Use a Phillips #0 screwdriver to unscrew the two 6mm screws.

Step 3

  • Use a plastic opening tool to pry the keyboard off the edges of the computer.
  • The edges will make a popping noise.

Use a plastic opening tool to pry the keyboard off the edges of the computer.

The edges will make a popping noise.

Step 4

  • Flip up the white bar that connects the thin white strip using a plastic opening tool.
  • Grab the thin white strip and pull straight back to remove the strip from the connector.

Flip up the white bar that connects the thin white strip using a plastic opening tool.

Grab the thin white strip and pull straight back to remove the strip from the connector.

Step 5

  • Use a plastic opening tool to lift the black bar above the wide black strip in the connector.
  • Grab the wide black strip and pull straight back to remove the strip from the connector.
  • Remove the keyboard by lifting it straight up.

Use a plastic opening tool to lift the black bar above the wide black strip in the connector.

Grab the wide black strip and pull straight back to remove the strip from the connector.

Remove the keyboard by lifting it straight up.

Step 6

              Metal Plate
  • Unscrew the seven 4mm screws using a Phillips #0 screwdriver.
  • Wiggle the plate back and forth to loosen the adhesive under the plate.
  • The adhesive will not be the same after removal and more adhesive may be necessary upon reassembly.
  • Rotate the screwdriver in a counterclockwise direction to remove the screws.
  • Do not rest your arm or hand in the adhesive.

Unscrew the seven 4mm screws using a Phillips #0 screwdriver.

Wiggle the plate back and forth to loosen the adhesive under the plate.

The adhesive will not be the same after removal and more adhesive may be necessary upon reassembly.

Rotate the screwdriver in a counterclockwise direction to remove the screws.

Do not rest your arm or hand in the adhesive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Brittany M Won

Member since: 04/18/2018

577 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team S17-G4, Livingston Spring 2018                        

                                                  Member of Cal Poly, Team S17-G4, Livingston Spring 2018 



                    CPSU-LIVINGSTON-S18S17G4                     


                                            4 Members                     


                                            12 Guides authored