Difficulty
Moderate
Steps
11
Time Required
20 minutes
Sections
3
- Keyboard
- 5 steps
- Metal Plate
- 1 step
- Screen
- 5 steps
Flags
0
BackAsus Chromebook C201PA-DS02-LG
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Use a metal spudger to pry off the two feet closest to the hinge of the laptop.
- The feet are attached to the laptop by adhesives, therefore they may not stick as well after multiple removals.
Use a metal spudger to pry off the two feet closest to the hinge of the laptop.
The feet are attached to the laptop by adhesives, therefore they may not stick as well after multiple removals.
1024
Step 2
- Use a Phillips #0 screwdriver to unscrew the six 5mm screws.
- Use a Phillips #0 screwdriver to unscrew the two 6mm screws.
Use a Phillips #0 screwdriver to unscrew the six 5mm screws.
Use a Phillips #0 screwdriver to unscrew the two 6mm screws.
Step 3
- Use a plastic opening tool to pry the keyboard off the edges of the computer.
- The edges will make a popping noise.
Use a plastic opening tool to pry the keyboard off the edges of the computer.
The edges will make a popping noise.
Step 4
- Flip up the white bar that connects the thin white strip using a plastic opening tool.
- Grab the thin white strip and pull straight back to remove the strip from the connector.
Flip up the white bar that connects the thin white strip using a plastic opening tool.
Grab the thin white strip and pull straight back to remove the strip from the connector.
Step 5
- Use a plastic opening tool to lift the black bar above the wide black strip in the connector.
- Grab the wide black strip and pull straight back to remove the strip from the connector.
- Remove the keyboard by lifting it straight up.
Use a plastic opening tool to lift the black bar above the wide black strip in the connector.
Grab the wide black strip and pull straight back to remove the strip from the connector.
Remove the keyboard by lifting it straight up.
Step 6
Metal Plate
- Unscrew the seven 4mm screws using a Phillips #0 screwdriver.
- Wiggle the plate back and forth to loosen the adhesive under the plate.
- The adhesive will not be the same after removal and more adhesive may be necessary upon reassembly.
- Rotate the screwdriver in a counterclockwise direction to remove the screws.
- Do not rest your arm or hand in the adhesive.
Unscrew the seven 4mm screws using a Phillips #0 screwdriver.
Wiggle the plate back and forth to loosen the adhesive under the plate.
The adhesive will not be the same after removal and more adhesive may be necessary upon reassembly.
Rotate the screwdriver in a counterclockwise direction to remove the screws.
Do not rest your arm or hand in the adhesive.
Step 7
Screen
- Unscrew the 4mm screws with a Phillips #0 screwdriver by rotating the screwdriver counterclockwise.
- There is a screw that is hidden under the black tarped connection that connects the screen to the motherboard.
Unscrew the 4mm screws with a Phillips #0 screwdriver by rotating the screwdriver counterclockwise.
There is a screw that is hidden under the black tarped connection that connects the screen to the motherboard.
Step 8
- Lift the tarp material straight up off the external output using tweezers. It is simply taped on.
Lift the tarp material straight up off the external output using tweezers. It is simply taped on.
Step 9
- Use a pair of tweezers to grip the tarped connector and lift vertically up. It may help to do this on each side of the attachment, rather than in one pull.
- Lifting the tarped connector straight up may feel like you are breaking it, but this is normal.
Use a pair of tweezers to grip the tarped connector and lift vertically up. It may help to do this on each side of the attachment, rather than in one pull.
Lifting the tarped connector straight up may feel like you are breaking it, but this is normal.
Step 10
- Pop these two connections off by using tweezers to lift straight up.
Pop these two connections off by using tweezers to lift straight up.
Step 11
- Lift the screen up to fully remove.
Lift the screen up to fully remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Brittany M Won
Member since: 04/18/2018
577 Reputation
5 Guides authored
Badges:
6
+3 more badges
Team
Cal Poly, Team S17-G4, Livingston Spring 2018
Member of Cal Poly, Team S17-G4, Livingston Spring 2018
CPSU-LIVINGSTON-S18S17G4
4 Members
12 Guides authored
