Difficulty
Moderate
Steps
15
Time Required
40 minutes
Sections
5
- Back Panel
- 3 steps
- Wireless Card
- 3 steps
- Battery
- 4 steps
- Motherboard
- 3 steps
- Heatsink
- 2 steps
Flags
0
BackAsus Chromebook C202
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Be sure to clean the contact surfaces on both the heatsink and CPU with isopropyl alcohol during replacement and reapply thermal paste during reinstallation. Sometimes reapplying the thermal paste is all that’s necessary to reattain good heat transfer and restore the condition of your device.
What you need
Step 1
Back Panel
- Remove ten 8 mm Phillips #1 screws from the bottom of the Chromebook using a Phillips #1 screwdriver.
- Two of the screws are hidden by rubber caps along the rubber rest of the device. Use tweezers to get them out.
Remove ten 8 mm Phillips #1 screws from the bottom of the Chromebook using a Phillips #1 screwdriver.
Two of the screws are hidden by rubber caps along the rubber rest of the device. Use tweezers to get them out.
1024
Step 2
- Place the plastic opening tool into the edges between the front of the Chromebook and the back of it with the upper scoop of the opening tool facing upward.
- Push down on the plastic opening tool to unhinge the top portion of the Chromebook from its lower portion. Opening the Chromebook all the way where the display touches the ground helps in opening up the top edge.
- Use your hand to gently lift the top portion of the Chromebook from the bottom portion of it to avoid damaging the ribbon cables.
Place the plastic opening tool into the edges between the front of the Chromebook and the back of it with the upper scoop of the opening tool facing upward.
Push down on the plastic opening tool to unhinge the top portion of the Chromebook from its lower portion. Opening the Chromebook all the way where the display touches the ground helps in opening up the top edge.
Use your hand to gently lift the top portion of the Chromebook from the bottom portion of it to avoid damaging the ribbon cables.
Step 3
- Gently disconnect the ribbon cable connecting the trackpad to the motherboard.
- Gently disconnect the ribbon cable connecting the keyboard to the motherboard.
Gently disconnect the ribbon cable connecting the trackpad to the motherboard.
Gently disconnect the ribbon cable connecting the keyboard to the motherboard.
Step 4
Wireless Card
- Remove the black and white wires from the wireless card.
Remove the black and white wires from the wireless card.
Step 5
- Unscrew the single 4 mm Phillips #1 screw pinning the wireless card in place.
Unscrew the single 4 mm Phillips #1 screw pinning the wireless card in place.
Step 6
- Gently pull the wireless card away from the motherboard.
Gently pull the wireless card away from the motherboard.
Step 7
Battery
- Pull the latch out on both the Input/Output board as well as the motherboard.
- Gently remove the ribbon cable connecting the I/O board to the motherboard.
Pull the latch out on both the Input/Output board as well as the motherboard.
Gently remove the ribbon cable connecting the I/O board to the motherboard.
Step 8
- Remove two 4 mm Phillips #1 screws from the metal grate connected to the battery.
- Remove metal grate from battery.
- Remove six 4 mm Phillips #1 screws from the battery
Remove two 4 mm Phillips #1 screws from the metal grate connected to the battery.
Remove metal grate from battery.
Remove six 4 mm Phillips #1 screws from the battery
Step 9
- Disconnect the battery from the motherboard.
- Lift battery from the bottom portion of the Chromebook.
Disconnect the battery from the motherboard.
Lift battery from the bottom portion of the Chromebook.
Step 10
- Remove the battery from the Chromebook.
Remove the battery from the Chromebook.
Step 11
Motherboard
- Unscrew one 3 mm Phillips #1 screw.
- Unscrew one 2.5 mm Phillips #1 screw.
- Unscrew four 4 mm Phillips #1 screws.
Unscrew one 3 mm Phillips #1 screw.
Unscrew one 2.5 mm Phillips #1 screw.
Unscrew four 4 mm Phillips #1 screws.
Step 12
- Disconnect the wires that connect the motherboard to the speakers.
- Disconnect the motherboard from the display.
Disconnect the wires that connect the motherboard to the speakers.
Disconnect the motherboard from the display.
Step 13
- Lift the motherboard up and out of the chassis.
Lift the motherboard up and out of the chassis.
Step 14
Heatsink
- After removing the motherboard, flip it, right hand over left, to reveal the heatsink.
- When the motherboard is laying on the table, the wireless card slot should be on the top left corner of the motherboard.
- On the right should be the various USB and plug in ports.
- The heatsink is easily identifiable by the copper band that stretches across the back of the motherboard.
- Using a Phillips #0 Screwdriver take out the four screws holding in the heatsink.
After removing the motherboard, flip it, right hand over left, to reveal the heatsink.
When the motherboard is laying on the table, the wireless card slot should be on the top left corner of the motherboard.
On the right should be the various USB and plug in ports.
The heatsink is easily identifiable by the copper band that stretches across the back of the motherboard.
Using a Phillips #0 Screwdriver take out the four screws holding in the heatsink.
Step 15
- Remove the heatsink.
- Boom. Now the heatsink is separated from the motherboard and it can easily be replaced with a new one.
- Warning: thermal module not for consumption.
Remove the heatsink.
Boom. Now the heatsink is separated from the motherboard and it can easily be replaced with a new one.
Warning: thermal module not for consumption.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Jason Beal
Member since: 10/03/2019
85 Reputation
1 Guide authored
Badges:
2
Team
The Citadel Military College of South Carolina, Team S1-G18, Eggleston Fall 2019
Member of The Citadel Military College of South Carolina, Team S1-G18, Eggleston Fall 2019
CMCSC-EGGLESTON-F19S1G18
3 Members
3 Guides authored