Asus Chromebook C202 Metal Bracket Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          10 minutes            

Sections

3

• Palm Rest
• 3 steps
• Daughterboard
• 2 steps
• Metal Bracket
• 2 steps

Flags

0

• BackAsus Chromebook C202

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Palm Rest               

• Turn the device over so the bottom is facing up.
• Remove the ten Phillips #1 8.0 mm screws.

Turn the device over so the bottom is facing up.

Remove the ten Phillips #1 8.0 mm screws.

1024

Step 2

• Carefully use the plastic opening tool to pry the palm rest apart from the bottom cover. Start from one spot and systematically work your way around until the whole palm rest is detached.

Carefully use the plastic opening tool to pry the palm rest apart from the bottom cover. Start from one spot and systematically work your way around until the whole palm rest is detached.

Step 3

• Disconnect the two cables that run from the keyboard to the motherboard and from the touch pad to the motherboard.
• You may have to use a spudger to lift open the respective latches.

Disconnect the two cables that run from the keyboard to the motherboard and from the touch pad to the motherboard.

You may have to use a spudger to lift open the respective latches.

Step 4

              Daughterboard               

• Remove both Phillips #1 4.5 mm screws from the daughterboard.

Remove both Phillips #1 4.5 mm screws from the daughterboard.

Step 5

• Gently remove the thin band from the daughterboard. You may have to use a thin blade or spudger to lift the silver clip to release the band.

Gently remove the thin band from the daughterboard. You may have to use a thin blade or spudger to lift the silver clip to release the band.

Step 6

              Metal Bracket               

• Use a Phillips screwdriver to remove three 4 mm Phillips #1 screws from the metal bracket.

Use a Phillips screwdriver to remove three 4 mm Phillips #1 screws from the metal bracket.

Step 7

• Once all the screws are removed the metal bracket can be disconnected from the motherboard.
• Remove the metal bracket.

Once all the screws are removed the metal bracket can be disconnected from the motherboard.

Remove the metal bracket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Donovan O'Dea                     

Member since: 10/03/2019

85 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       The Citadel Military College of South Carolina, Team S1-G18, Eggleston Fall 2019                        

                                                  Member of The Citadel Military College of South Carolina, Team S1-G18, Eggleston Fall 2019 



                    CMCSC-EGGLESTON-F19S1G18                     


                                            3 Members                     


                                            3 Guides authored