Difficulty

Easy

Steps

6

Time Required

                          15 minutes

Sections

2

  • Back Panel
  • 3 steps
  • Wireless Card
  • 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAsus Chromebook C202

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Remove ten 8 mm Phillips #1 screws from the bottom of the Chromebook using a Phillips #1 screwdriver.
  • Two of the screws are hidden by rubber caps along the rubber rest of the device. Use tweezers to get them out.

Remove ten 8 mm Phillips #1 screws from the bottom of the Chromebook using a Phillips #1 screwdriver.

Two of the screws are hidden by rubber caps along the rubber rest of the device. Use tweezers to get them out.

1024

Step 2

  • Place the plastic opening tool into the edges between the front of the Chromebook and the back of it with the upper scoop of the opening tool facing upward.
  • Push down on the plastic opening tool to unhinge the top portion of the Chromebook from its lower portion. Opening the Chromebook all the way where the display touches the ground helps in opening up the top edge.
  • Use your hand to gently lift the top portion of the Chromebook from the bottom portion of it to avoid damaging the ribbon cables.

Place the plastic opening tool into the edges between the front of the Chromebook and the back of it with the upper scoop of the opening tool facing upward.

Push down on the plastic opening tool to unhinge the top portion of the Chromebook from its lower portion. Opening the Chromebook all the way where the display touches the ground helps in opening up the top edge.

Use your hand to gently lift the top portion of the Chromebook from the bottom portion of it to avoid damaging the ribbon cables.

Step 3

  • Gently disconnect the ribbon cable connecting the trackpad to the motherboard.
  • Gently disconnect the ribbon cable connecting the keyboard to the motherboard.

Gently disconnect the ribbon cable connecting the trackpad to the motherboard.

Gently disconnect the ribbon cable connecting the keyboard to the motherboard.

Step 4

              Wireless Card
  • Remove the black and white wires from the wireless card.

Remove the black and white wires from the wireless card.

Step 5

  • Unscrew the single 4 mm Phillips #1 screw pinning the wireless card in place.

Unscrew the single 4 mm Phillips #1 screw pinning the wireless card in place.

Step 6

  • Gently pull the wireless card away from the motherboard.

Gently pull the wireless card away from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Christopher Segale

Member since: 09/28/2016

859 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 3-1, Passmore Fall 2016                        

                                                  Member of USF Tampa, Team 3-1, Passmore Fall 2016 



                    USFT-PASSMORE-F16S3G1                     


                                            4 Members                     


                                            11 Guides authored