Asus Chromebook C202Sa Ys02 Daughterboard Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 minutes            

Sections

2

• Palm Rest
• 3 steps
• Daughterboard
• 2 steps

Flags

0

• BackAsus Chromebook C202

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Palm Rest               

• Turn the device over so the bottom is facing up.
• Remove the ten Phillips #1 8.0 mm screws.

Turn the device over so the bottom is facing up.

Remove the ten Phillips #1 8.0 mm screws.

1024

Step 2

• Carefully use the plastic opening tool to pry the palm rest apart from the bottom cover. Start from one spot and systematically work your way around until the whole palm rest is detached.

Carefully use the plastic opening tool to pry the palm rest apart from the bottom cover. Start from one spot and systematically work your way around until the whole palm rest is detached.

Step 3

• Disconnect the two cables that run from the keyboard to the motherboard and from the touch pad to the motherboard.
• You may have to use a spudger to lift open the respective latches.

Disconnect the two cables that run from the keyboard to the motherboard and from the touch pad to the motherboard.

You may have to use a spudger to lift open the respective latches.

Step 4

              Daughterboard               

• Remove both Phillips #1 4.5 mm screws from the daughterboard.

Remove both Phillips #1 4.5 mm screws from the daughterboard.

Step 5

• Gently remove the thin band from the daughterboard. You may have to use a thin blade or spudger to lift the silver clip to release the band.

Gently remove the thin band from the daughterboard. You may have to use a thin blade or spudger to lift the silver clip to release the band.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Beau Hansen                     

Member since: 09/28/2017

836 Reputation

                                      7 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Idaho State University, Team S4-G4, Watkins Fall 2017                        

                                                  Member of Idaho State University, Team S4-G4, Watkins Fall 2017 



                    ISU-WATKINS-F17S4G4                     


                                            4 Members                     


                                            13 Guides authored                     

Navreet - Apr 23, 2019

Reply

If I connected a wrong power supply to my notebook, (Input 120V 60Hz 12W, Output DC 9V, 500mA) with reversed polarity by accident, what if anything could have been burned/ruined? Thank you.