Difficulty
Moderate
Steps
5
Time Required
4 minutes
Sections
2
- Palm Rest
- 3 steps
- Touch Pad
- 2 steps
Flags
0
BackAsus Chromebook C202
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Palm Rest
- Turn the device over so the bottom is facing up.
- Remove the ten Phillips #1 8.0 mm screws.
Turn the device over so the bottom is facing up.
Remove the ten Phillips #1 8.0 mm screws.
1024
Step 2
- Carefully use the plastic opening tool to pry the palm rest apart from the bottom cover. Start from one spot and systematically work your way around until the whole palm rest is detached.
Carefully use the plastic opening tool to pry the palm rest apart from the bottom cover. Start from one spot and systematically work your way around until the whole palm rest is detached.
Step 3
- Disconnect the two cables that run from the keyboard to the motherboard and from the touch pad to the motherboard.
- You may have to use a spudger to lift open the respective latches.
Disconnect the two cables that run from the keyboard to the motherboard and from the touch pad to the motherboard.
You may have to use a spudger to lift open the respective latches.
Step 4
Touch Pad
- Gently peel off gold tape.
Gently peel off gold tape.
Step 5
- Remove the three Phillips #1 3.5 mm screws located on the under-side of the palm rest.
- You can now pop out the touch pad.
Remove the three Phillips #1 3.5 mm screws located on the under-side of the palm rest.
You can now pop out the touch pad.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Beau Hansen
Member since: 09/28/2017
836 Reputation
7 Guides authored
Badges:
9
+6 more badges
Team
Idaho State University, Team S4-G4, Watkins Fall 2017
Member of Idaho State University, Team S4-G4, Watkins Fall 2017
ISU-WATKINS-F17S4G4
4 Members
13 Guides authored
