Difficulty
Moderate
Steps
6
Time Required
20 minutes
Sections
2
- Bottom Panel
- 4 steps
- Battery
- 2 steps
Flags
0
BackAsus Chromebook C300M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Panel
- Flip the Chromebook over, bottom-side up.
Flip the Chromebook over, bottom-side up.
1024
Step 2
- Remove the screws from the 11 spots using the aluminum driver with the J00 Philips head provided in iFixit toolkit.
- Remove the eight 9.0mm Philips screws along the perimeter of the case.
- Remove the three 6.0mm Philips screws from the center of the case.
- Some versions may instead have six bigger screws (the four on the upper side of the image, close to the hinge, and two on the sides) and five smaller ones (four at the bottom of the image, where the laptop is thinner, and one in the center).
Remove the screws from the 11 spots using the aluminum driver with the J00 Philips head provided in iFixit toolkit.
Remove the eight 9.0mm Philips screws along the perimeter of the case.
Remove the three 6.0mm Philips screws from the center of the case.
Some versions may instead have six bigger screws (the four on the upper side of the image, close to the hinge, and two on the sides) and five smaller ones (four at the bottom of the image, where the laptop is thinner, and one in the center).
Step 3
- Using a plastic opening tool, work around the Chromebook separating the plastic case at the seam.
Using a plastic opening tool, work around the Chromebook separating the plastic case at the seam.
Step 4
- Open the Chromebook at hinges.
Open the Chromebook at hinges.
Step 5
Battery
- Remove the 6.0mm Philips screws from around the battery.
Remove the 6.0mm Philips screws from around the battery.
Step 6
- Lift the battery out of the laptop.
Lift the battery out of the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
13 other people completed this guide.
Author
with 4 other contributors
Jake Van Loon
Member since: 09/25/2015
932 Reputation
3 Guides authored
Badges:
16
+13 more badges
Team
University of Tampa, Team 1-1, Whiteside Fall 2015
Member of University of Tampa, Team 1-1, Whiteside Fall 2015
UT-WHITESIDE-F15S1G1
3 Members
8 Guides authored
Mike Kelly - Dec 26, 2016
Reply
It’s not clear from these instructions how to actually disconnect the battery’s wires from the main board… can you provide some guidance there?
Aaron Simich - Apr 13, 2017
Reply
PLS ANSWER MIKES QUESTION. You cant just remove the battery without disconnecting a wire which seems fragile so I can not go any further without this instruction. sighhhhhhdsgkhdsf;gklfxgbl;dfkbn; so annoying.
cc manley - May 18, 2017
Reply
I replaced the battery, no problem Thank you Jake Van Loon and 4 others. My current problem is - in the process of replacing the battery the thin white strip that comes down from the top became disconnected. I notice in Step 4 of the Battery instructions that the strip is attached but in Step 5 is isnt. Can someone explain to me just how to reconnect that. Please. Any help is truely appreciated.
Jennifer Scheinhorn - Jul 8, 2017
Reply
https://www.youtube.com/watch?v=7LS54oF0…
kaulad - Aug 28, 2017
Reply
The battery plug is like no other I have ever seen.
Thanks in advance