Asus Chromebook C300M Mousepad Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 10 minutes

Sections

Mousepad
4 steps

Flags

BackAsus Chromebook C300M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Mousepad

Flip the Chromebook on its front.
Remove the screws on the back using the Phillips #1 screwdriver.
Remove the six 8mm screws.
Remove the five 5mm screws.

Flip the Chromebook on its front.

Remove the screws on the back using the Phillips #1 screwdriver.

Remove the six 8mm screws.

Remove the five 5mm screws.

1024

Step 2

Separate the plastic case from the keyboard at the seam by using a plastic opening tool.

Separate the plastic case from the keyboard at the seam by using a plastic opening tool.

Step 3

The small and wide ribbon cables connect the keyboard to the motherboard.
Disconnect the small ribbon cable by lifting the flap and sliding it out of the motherboard input toward the battery using a spudger.
Disconnect the wide ribbon cable by lifting the flap and sliding it out of the motherboard input toward the battery using spudger.

The small and wide ribbon cables connect the keyboard to the motherboard.

Disconnect the small ribbon cable by lifting the flap and sliding it out of the motherboard input toward the battery using a spudger.

Disconnect the wide ribbon cable by lifting the flap and sliding it out of the motherboard input toward the battery using spudger.

Step 4

Remove the keyboard and flip it onto its front. You should see the back of the mousepad.
Lift the foil strips to reveal two hidden screws. Then remove all four 2mm screws from the top of the trackpad with the Phillips #1 screwdriver.
Remove the mousepad by sliding it upward.

Remove the keyboard and flip it onto its front. You should see the back of the mousepad.

Lift the foil strips to reveal two hidden screws. Then remove all four 2mm screws from the top of the trackpad with the Phillips #1 screwdriver.

Remove the mousepad by sliding it upward.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Rachel Cadle

Member since: 04/02/2019

259 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       IUPUI, Team S3-G2, Harley Spring 2019                        

                                                  Member of IUPUI, Team S3-G2, Harley Spring 2019 



                    IUPUI-HARLEY-S19S3G2                     


                                            3 Members                     


                                            4 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team