Difficulty

Moderate

Steps

6

Time Required

                          5 - 10 minutes

Sections

1

  • USB Port
  • 6 steps

Flags

0

  • BackAsus Chromebook C300M

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              USB Port
  • Flip the chromebook on its front.
  • Remove the screws on the back using the Phillips #1 screwdriver.
  • Remove the six 8mm screws.
  • Remove the five 5mm screws.

Flip the chromebook on its front.

Remove the screws on the back using the Phillips #1 screwdriver.

Remove the six 8mm screws.

Remove the five 5mm screws.

1024

Step 2

  • Separate the plastic case from the keyboard at the seam using a plastic opening tool.

Separate the plastic case from the keyboard at the seam using a plastic opening tool.

Step 3

  • Fully separate the plastic case from the keyboard by lifting it upward.

Fully separate the plastic case from the keyboard by lifting it upward.

Step 4

  • The small and wide ribbon cables connect the keyboard to the motherboard.
  • Disconnect the small ribbon cable by lifting the flap and sliding it out of the motherboard input toward the battery using a spudger.
  • Disconnect the wide ribbon cable by lifting the flap and sliding it out of the motherboard input toward the battery using a spudger.

The small and wide ribbon cables connect the keyboard to the motherboard.

Disconnect the small ribbon cable by lifting the flap and sliding it out of the motherboard input toward the battery using a spudger.

Disconnect the wide ribbon cable by lifting the flap and sliding it out of the motherboard input toward the battery using a spudger.

Step 5

  • Disconnect the USB port in the top right corner from the motherboard.
  • Unplug the the wide ribbon cable using spudger.

Disconnect the USB port in the top right corner from the motherboard.

Unplug the the wide ribbon cable using spudger.

Step 6

  • Remove the single 3mm screw on the left and bottom side of the USB Port using the Phillips #1 screwdriver.
  • Remove the three 5mm screws on the upper part of the USB port with the same screwdriver.
  • Lift the edge of the white casing. Remove the USB Port by pulling it toward the bottom of the laptop.

Remove the single 3mm screw on the left and bottom side of the USB Port using the Phillips #1 screwdriver.

Remove the three 5mm screws on the upper part of the USB port with the same screwdriver.

Lift the edge of the white casing. Remove the USB Port by pulling it toward the bottom of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Rachel Cadle

Member since: 04/02/2019

259 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       IUPUI, Team S3-G2, Harley Spring 2019                        

                                                  Member of IUPUI, Team S3-G2, Harley Spring 2019 



                    IUPUI-HARLEY-S19S3G2                     


                                            3 Members                     


                                            4 Guides authored