Asus Chromebook C300Ma Bbcln12 Battery Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          10 minutes            

Sections

1

• Battery
• 6 steps

Flags

0

• BackAsus Chromebook C300MA-BBCLN12

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the eight 9.0mm Phillips #00 screws.
• Remove the three 6.0mm Phillips #00 screws.

Remove the eight 9.0mm Phillips #00 screws.

Remove the three 6.0mm Phillips #00 screws.

1024

Step 2

• Separate the palm rest assembly from the bottom housing using the plastic opening tool.
• It is recommended that you start from a corner and run the plastic opening tool along the edge of the housing.
• Lift the palm rest assembly slowly to prevent damaging the two cables that connect it to the motherboard.

Separate the palm rest assembly from the bottom housing using the plastic opening tool.

It is recommended that you start from a corner and run the plastic opening tool along the edge of the housing.

Lift the palm rest assembly slowly to prevent damaging the two cables that connect it to the motherboard.

Step 3

• Flip back the hinges on the connectors that secure the wide black cable and the narrow white cable using the tweezers.
• Disconnect the wide black cable from the motherboard by pulling the blue cable tab away from the connector.
• Disconnect the white ribbon cable from the motherboard by pulling the blue cable tab away from the connector.

Flip back the hinges on the connectors that secure the wide black cable and the narrow white cable using the tweezers.

Disconnect the wide black cable from the motherboard by pulling the blue cable tab away from the connector.

Disconnect the white ribbon cable from the motherboard by pulling the blue cable tab away from the connector.

Step 4

• Remove the six 6.0mm Phillips #00 screws that secure the battery to the bottom housing.

Remove the six 6.0mm Phillips #00 screws that secure the battery to the bottom housing.

Step 5

• Disconnect the bundled cable connector that attaches the battery to the motherboard using the small plastic spudger.

Disconnect the bundled cable connector that attaches the battery to the motherboard using the small plastic spudger.

Step 6

• Remove the battery from the bottom housing.

Remove the battery from the bottom housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Brooke Austin                     

Member since: 10/05/2017

419 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Portland State University, Team S1-G2, Read Fall 2017                        

                                                  Member of Portland State University, Team S1-G2, Read Fall 2017 



                    PSUN-READ-F17S1G2                     


                                            4 Members                     


                                            10 Guides authored