Asus Chromebook C300Ma Bbcln12 Display Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Display
3 steps

Flags

BackAsus Chromebook C300MA-BBCLN12
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Display

Wedge the tip of the plastic spudger between the outer display casing and the inner display panel liner.
Separate the outer display casing from the inner display panel by sliding the plastic spudger around the perimeter of the display.
It is necessary to pull the inner display panel firmly when separating it from the outer display casing along the bottom of the device.

Wedge the tip of the plastic spudger between the outer display casing and the inner display panel liner.

Separate the outer display casing from the inner display panel by sliding the plastic spudger around the perimeter of the display.

It is necessary to pull the inner display panel firmly when separating it from the outer display casing along the bottom of the device.

1024

Step 2

Remove the four 3.0mm PH00 screws from the four corners of the display.
Grip the edges of the display and tip it forward until it rests on the keyboard.
A cable connects the display to the display casing at the bottom. Separate the display panel slowly to prevent damaging the cable.

Remove the four 3.0mm PH00 screws from the four corners of the display.

Grip the edges of the display and tip it forward until it rests on the keyboard.

A cable connects the display to the display casing at the bottom. Separate the display panel slowly to prevent damaging the cable.

Step 3

Locate the gold cable connector that attaches the display to the bottom of the display housing.
Peel back the protective tape that covers the gold connector.
Disconnect the display from the display housing by gripping the sides of the gold display cable connector and pulling away from the bottom of the display.

Locate the gold cable connector that attaches the display to the bottom of the display housing.

Peel back the protective tape that covers the gold connector.

Disconnect the display from the display housing by gripping the sides of the gold display cable connector and pulling away from the bottom of the display.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Brooke Austin

Member since: 10/05/2017

419 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Portland State University, Team S1-G2, Read Fall 2017                        

                                                  Member of Portland State University, Team S1-G2, Read Fall 2017 



                    PSUN-READ-F17S1G2                     


                                            4 Members                     


                                            10 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team