Difficulty

Moderate

Steps

4

Time Required

                          25 - 30 minutes            

Sections

1

  • Battery
  • 4 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackAsus Chromebook C300MA DB01

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing the Back Cover               
  • Remove the eight 9.0 mm Phillips screws along the perimeter of the case.
  • Remove the three 6.0 mm Phillips screws from the center of the case.

Remove the eight 9.0 mm Phillips screws along the perimeter of the case.

Remove the three 6.0 mm Phillips screws from the center of the case.

1024

Step 2

              Taking off the Keyboard               
  • Slide the Jimmy in between the keyboard and underside of the laptop to remove the keyboard.
  • Leave the keyboard face down on the screen.
  • Do not pull the keyboard away from the laptop. The keyboard will still be attached with wires.

Slide the Jimmy in between the keyboard and underside of the laptop to remove the keyboard.

Leave the keyboard face down on the screen.

Do not pull the keyboard away from the laptop. The keyboard will still be attached with wires.

Step 3

              Detaching keyboard               
  • Use a nylon spudger to lift the latch on each wire jack and detach the keyboard wires.
  • After the tabs have been lifted, the wire can be gently pulled out by hand.
  • Set the keyboard aside.

Use a nylon spudger to lift the latch on each wire jack and detach the keyboard wires.

After the tabs have been lifted, the wire can be gently pulled out by hand.

Set the keyboard aside.

Step 4

              Removing the battery               
  • Remove the six 6.0mm Phillips screws on the battery.
  • Remove the wire jack from the battery. Use a nylon spudger to lift the latch.
  • Remove the battery from the device.

Remove the six 6.0mm Phillips screws on the battery.

Remove the wire jack from the battery. Use a nylon spudger to lift the latch.

Remove the battery from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Earl Gill IV                     

Member since: 04/01/2019

193 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S10-G10, Wilson Spring 2019                        

                                                  Member of IUPUI, Team S10-G10, Wilson Spring 2019 



                    IUPUI-WILSON-S19S10G10                     


                                            3 Members                     


                                            3 Guides authored