Difficulty
Easy
Steps
7
Time Required
15 minutes
Sections
2
- Back Cover
- 4 steps
- Battery
- 3 steps
Flags
1
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackAsus Chromebook C300MA DB01
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Place device bottom-side up.
Place device bottom-side up.
1024
Step 2
- Remove the eight 9.0 mm Philips screws along the perimeter of the case.
- Remove the three 6.0 mm Philips screws from the center of the case.
Remove the eight 9.0 mm Philips screws along the perimeter of the case.
Remove the three 6.0 mm Philips screws from the center of the case.
Step 3
- Using a plastic opening tool, separate the bottom case at the steam.
Using a plastic opening tool, separate the bottom case at the steam.
Step 4
- Open the Chromebook at hinges.
Open the Chromebook at hinges.
Step 5
Battery
- Remove the 6 6.0mm Philips screws, using the 64 bit driver from around the battery.
Remove the 6 6.0mm Philips screws, using the 64 bit driver from around the battery.
Step 6
- Unplug wire using the plastic opening tool that connects battery with board
Unplug wire using the plastic opening tool that connects battery with board
Step 7
- Lift the battery out of the laptop
Lift the battery out of the laptop
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
wyatt boyatt
Member since: 09/25/2017
541 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team S4-G3, Eyestone Fall 2017
Member of USF Tampa, Team S4-G3, Eyestone Fall 2017
USFT-EYESTONE-F17S4G3
3 Members
12 Guides authored
