Difficulty
Moderate
Steps
7
Time Required
15 minutes
Sections
1
- Audio Speakers
- 7 steps
Flags
0
BackASUS Chromebook C300MA-DH01
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Audio Speakers
- Flip the Chromebook over so the bottom of the device is facing up.
Flip the Chromebook over so the bottom of the device is facing up.
1024
Step 2
- Using the JIS-J0 Screwdriver, remove the following screws from the bottom:
- (5) Five 6mm screws
- (6) Six 8mm screws
Using the JIS-J0 Screwdriver, remove the following screws from the bottom:
(5) Five 6mm screws
(6) Six 8mm screws
Step 3
- Gently wedge the spudger in between the bottom of the device and the keyboard, and carefully pry the cover open. Then, carefully lift up on keyboard.
Gently wedge the spudger in between the bottom of the device and the keyboard, and carefully pry the cover open. Then, carefully lift up on keyboard.
Step 4
- Gently detach connecting cables
- Carefully flip up the large black tab.
- Carefully flip up the small white tab.
- Remove its corresponding black cable.
- Remove the corresponding white cable.
- The keyboard will be fully detached at this point.
Gently detach connecting cables
Carefully flip up the large black tab.
Carefully flip up the small white tab.
Remove its corresponding black cable.
Remove the corresponding white cable.
The keyboard will be fully detached at this point.
Step 5
- Using the JIS-J0 screwdriver, unscrew and remove from the battery:
- (6) Six 6mm screws
Using the JIS-J0 screwdriver, unscrew and remove from the battery:
(6) Six 6mm screws
Step 6
- Using the plastic opening tool, gently push the connector tab away from the battery to detach the cable.
- The battery will be fully detached at this point. Carefully lift it out of the device.
Using the plastic opening tool, gently push the connector tab away from the battery to detach the cable.
The battery will be fully detached at this point. Carefully lift it out of the device.
Step 7
- Using the plastic opening tool, disconnect the audio connector by pushing the audio tab toward the speakers.
- With the audio cable detached, carefully lift the speakers out of the device.
Using the plastic opening tool, disconnect the audio connector by pushing the audio tab toward the speakers.
With the audio cable detached, carefully lift the speakers out of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Gina Altimari
Member since: 09/28/2017
401 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
USF Tampa, Team S2-G5, Passmore Fall 2017
Member of USF Tampa, Team S2-G5, Passmore Fall 2017
USFT-PASSMORE-F17S2G5
3 Members
10 Guides authored