Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Keyboard & Trackpad Assembly
- 4 steps
Flags
0
BackASUS Chromebook C300MA-DH01
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard & Trackpad Assembly
- Flip the Chromebook over so the bottom of the device is facing up.
Flip the Chromebook over so the bottom of the device is facing up.
1024
Step 2
- Using the JIS-J0 Screwdriver, remove the following screws from the bottom:
- (5) Five 6mm screws
- (6) Six 8mm screws
Using the JIS-J0 Screwdriver, remove the following screws from the bottom:
(5) Five 6mm screws
(6) Six 8mm screws
Step 3
- Gently wedge the spudger in between the bottom of the device and the keyboard, and carefully pry the cover open. Then, carefully lift up on keyboard.
Gently wedge the spudger in between the bottom of the device and the keyboard, and carefully pry the cover open. Then, carefully lift up on keyboard.
Step 4
- Gently detach connecting cables.
- Carefully flip up the large black tab.
- Carefully flip up small white tab.
- Remove the corresponding black cable.
- Remove the corresponding white cable.
- The keyboard will be fully detached at this point.
Gently detach connecting cables.
Carefully flip up the large black tab.
Carefully flip up small white tab.
Remove the corresponding black cable.
Remove the corresponding white cable.
The keyboard will be fully detached at this point.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Gina Altimari
Member since: 09/28/2017
401 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
USF Tampa, Team S2-G5, Passmore Fall 2017
Member of USF Tampa, Team S2-G5, Passmore Fall 2017
USFT-PASSMORE-F17S2G5
3 Members
10 Guides authored
