Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

2

  • Keyboard Panel
  • 3 steps
  • Battery
  • 3 steps

Flags

1

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackAsus Chromebook C300MA-DH02

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard Panel
  • Flip the Chromebook over so that the underside is facing up.
  • Using the Phillips PH #000 screwdriver, remove the 11 “4mm” screws on the back of the device.

Flip the Chromebook over so that the underside is facing up.

Using the Phillips PH #000 screwdriver, remove the 11 “4mm” screws on the back of the device.

1024

Step 2

  • Wedge the plastic opening tool between the bottom cover of the laptop and the keyboard panel.
  • Apply pressure and move the plastic opening tool around the border of the laptop until it pops out.

Wedge the plastic opening tool between the bottom cover of the laptop and the keyboard panel.

Apply pressure and move the plastic opening tool around the border of the laptop until it pops out.

Step 3

  • Once the keyboard panel pops out, slowly move it upwards so that the keyboard connection is visible.
  • Remove the keyboard connection from the motherboard by pulling it outwards from the connector.

Once the keyboard panel pops out, slowly move it upwards so that the keyboard connection is visible.

Remove the keyboard connection from the motherboard by pulling it outwards from the connector.

Step 4

              Battery
  • Remove (6) six “4mm” screws that hold the battery using the Phillips #000 screwdriver.

Remove (6) six “4mm” screws that hold the battery using the Phillips #000 screwdriver.

Step 5

  • Placing two plastic opening tools on each side of the battery connector and gently pull with an even force on both sides of the connector until the connector pops out.

Placing two plastic opening tools on each side of the battery connector and gently pull with an even force on both sides of the connector until the connector pops out.

Step 6

  • Note: Your battery may have adhesive on the underside. If you cannot easily remove the battery you can use a hair dryer to evenly warm the glue.
  • Remove the battery by applying even force on both sides.
  • During reassembly, purchase of adhesive may be necessary.

Note: Your battery may have adhesive on the underside. If you cannot easily remove the battery you can use a hair dryer to evenly warm the glue.

Remove the battery by applying even force on both sides.

During reassembly, purchase of adhesive may be necessary.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Zachary Leonard

Member since: 10/02/2017

304 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team S6-G4, Remmell Fall 2017                        

                                                  Member of USF Tampa, Team S6-G4, Remmell Fall 2017 



                    USFT-REMMELL-F17S6G4                     


                                            4 Members                     


                                            12 Guides authored