Asus Chromebook C300Ma Dh02 Trackpad Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          10 - 15 minutes            

Sections

2

• Keyboard Panel
• 3 steps
• Trackpad
• 4 steps

Flags

1

Needs More Images

A few more images would make this guide’s procedures crystal clear.

• BackAsus Chromebook C300MA-DH02

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Keyboard Panel               

• Flip the Chromebook over so that the underside is facing up.
• Using the Phillips PH #000 screwdriver, remove the 11 “4mm” screws on the back of the device.

Flip the Chromebook over so that the underside is facing up.

Using the Phillips PH #000 screwdriver, remove the 11 “4mm” screws on the back of the device.

1024

Step 2

• Wedge the plastic opening tool between the bottom cover of the laptop and the keyboard panel.
• Apply pressure and move the plastic opening tool around the border of the laptop until it pops out.

Wedge the plastic opening tool between the bottom cover of the laptop and the keyboard panel.

Apply pressure and move the plastic opening tool around the border of the laptop until it pops out.

Step 3

• Once the keyboard panel pops out, slowly move it upwards so that the keyboard connection is visible.
• Remove the keyboard connection from the motherboard by pulling it outwards from the connector.

Once the keyboard panel pops out, slowly move it upwards so that the keyboard connection is visible.

Remove the keyboard connection from the motherboard by pulling it outwards from the connector.

Step 4

              Trackpad               

• Unplug the blue wire that connects trackpad to the keyboard.

Unplug the blue wire that connects trackpad to the keyboard.

Step 5

• Remove the aluminum tape that secures the trackpad. Use tweezers if necessary.

Remove the aluminum tape that secures the trackpad. Use tweezers if necessary.

Step 6

• Using the Phillips #000 screwdriver, remove the (4) four “4 mm” screws that secure trackpad onto keyboard.

Using the Phillips #000 screwdriver, remove the (4) four “4 mm” screws that secure trackpad onto keyboard.

Step 7

• Using a plastic opening tool, pry out the touchpad from the metal securing bracket.

Using a plastic opening tool, pry out the touchpad from the metal securing bracket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Raaefazer                     

Member since: 10/02/2017

131 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       USF Tampa, Team S6-G4, Remmell Fall 2017                        

                                                  Member of USF Tampa, Team S6-G4, Remmell Fall 2017 



                    USFT-REMMELL-F17S6G4                     


                                            4 Members                     


                                            12 Guides authored