Difficulty

Moderate

Steps

11

Time Required

                          35 - 40 minutes

Sections

3

  • Keyboard
  • 4 steps
  • Battery
  • 3 steps
  • Display Assembly
  • 4 steps

Flags

0

  • BackAsus Chromebook C300SA-DS02

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • Power the laptop off and make sure the charger is unplugged before starting.
  • Remove the eight 8.0mm Phillips #0 screws on the bottom of the laptop.
  • Remove the three 6.0mm Phillips #0 screws.

Power the laptop off and make sure the charger is unplugged before starting.

Remove the eight 8.0mm Phillips #0 screws on the bottom of the laptop.

Remove the three 6.0mm Phillips #0 screws.

1024

Step 2

  • Open the laptop.
  • Using an iFixit opening tool, pry along the edges of the keyboard.
  • Lift the keyboard and slide it gently towards you.
  • Do not completely remove the keyboard. It is still connected to the back panel by a pair of ribbon cables.

Open the laptop.

Using an iFixit opening tool, pry along the edges of the keyboard.

Lift the keyboard and slide it gently towards you.

Do not completely remove the keyboard. It is still connected to the back panel by a pair of ribbon cables.

Step 3

  • Disconnect the two ZIF connectors by prying up the locking bar with a spudger and removing the ribbon cable.

Disconnect the two ZIF connectors by prying up the locking bar with a spudger and removing the ribbon cable.

Step 4

  • Remove the keyboard from the laptop.

Remove the keyboard from the laptop.

Step 5

              Battery
  • Remove the six 5.6mm Phillips #0 screws around the battery.

Remove the six 5.6mm Phillips #0 screws around the battery.

Step 6

  • Using your thumb and index finger, pinch the multi-color cable and disconnect it from the motherboard.

Using your thumb and index finger, pinch the multi-color cable and disconnect it from the motherboard.

Step 7

  • Lift the battery out of the laptop.

Lift the battery out of the laptop.

Step 8

              Display Assembly
  • Unplug the black and white cable from the motherboard.
  • These two wires connect to the antenna within the display assembly. The white cable is longer and connects to the bottom import.

Unplug the black and white cable from the motherboard.

These two wires connect to the antenna within the display assembly. The white cable is longer and connects to the bottom import.

Step 9

  • Peel back the tape covering the display cable.
  • Ease the cable towards the screen and out from the connector.

Peel back the tape covering the display cable.

Ease the cable towards the screen and out from the connector.

Step 10

  • Use a Phillips #0 driver to remove the six 5mm screws on the top right and left display hinges.

Use a Phillips #0 driver to remove the six 5mm screws on the top right and left display hinges.

Step 11

  • Gently lift the display assembly up and away from the laptop.

Gently lift the display assembly up and away from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Celina Monteiro

Member since: 10/17/2017

224 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team S1-G7, Simcock Fall 2017                        

                                                  Member of UMass Dartmouth, Team S1-G7, Simcock Fall 2017 



                    UMASSD-SIMCOCK-F17S1G7                     


                                            3 Members                     


                                            9 Guides authored