Difficulty
Easy
Steps
4
Time Required
2 minutes
Sections
1
- Keyboard
- 4 steps
Flags
0
BackAsus Chromebook C300SA-DS02
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Power the laptop off and make sure the charger is unplugged before starting.
- Remove the eight 8.0mm Phillips #0 screws on the bottom of the laptop.
- Remove the three 6.0mm Phillips #0 screws.
Power the laptop off and make sure the charger is unplugged before starting.
Remove the eight 8.0mm Phillips #0 screws on the bottom of the laptop.
Remove the three 6.0mm Phillips #0 screws.
1024
Step 2
- Open the laptop.
- Using an iFixit opening tool, pry along the edges of the keyboard.
- Lift the keyboard and slide it gently towards you.
- Do not completely remove the keyboard. It is still connected to the back panel by a pair of ribbon cables.
Open the laptop.
Using an iFixit opening tool, pry along the edges of the keyboard.
Lift the keyboard and slide it gently towards you.
Do not completely remove the keyboard. It is still connected to the back panel by a pair of ribbon cables.
Step 3
- Disconnect the two ZIF connectors by prying up the locking bar with a spudger and removing the ribbon cable.
Disconnect the two ZIF connectors by prying up the locking bar with a spudger and removing the ribbon cable.
Step 4
- Remove the keyboard from the laptop.
Remove the keyboard from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Lewis Shabshelowitz
Member since: 10/17/2017
232 Reputation
2 Guides authored
Badges:
12
+9 more badges
Team
UMass Dartmouth, Team S1-G7, Simcock Fall 2017
Member of UMass Dartmouth, Team S1-G7, Simcock Fall 2017
UMASSD-SIMCOCK-F17S1G7
3 Members
9 Guides authored
