Difficulty
Easy
Steps
14
Time Required
15 minutes
Sections
3
- Keyboard
- 4 steps
- Battery
- 3 steps
- LED Screen
- 7 steps
Flags
0
BackAsus Chromebook C300SA-DS02
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Power the laptop off and make sure the charger is unplugged before starting.
- Remove the eight 8.0mm Phillips #0 screws on the bottom of the laptop.
- Remove the three 6.0mm Phillips #0 screws.
Power the laptop off and make sure the charger is unplugged before starting.
Remove the eight 8.0mm Phillips #0 screws on the bottom of the laptop.
Remove the three 6.0mm Phillips #0 screws.
1024
Step 2
- Open the laptop.
- Using an iFixit opening tool, pry along the edges of the keyboard.
- Lift the keyboard and slide it gently towards you.
- Do not completely remove the keyboard. It is still connected to the back panel by a pair of ribbon cables.
Open the laptop.
Using an iFixit opening tool, pry along the edges of the keyboard.
Lift the keyboard and slide it gently towards you.
Do not completely remove the keyboard. It is still connected to the back panel by a pair of ribbon cables.
Step 3
- Disconnect the two ZIF connectors by prying up the locking bar with a spudger and removing the ribbon cable.
Disconnect the two ZIF connectors by prying up the locking bar with a spudger and removing the ribbon cable.
Step 4
- Remove the keyboard from the laptop.
Remove the keyboard from the laptop.
Step 5
Battery
- Remove the six 5.6mm Phillips #0 screws around the battery.
Remove the six 5.6mm Phillips #0 screws around the battery.
Step 6
- Using your thumb and index finger, pinch the multi-color cable and disconnect it from the motherboard.
Using your thumb and index finger, pinch the multi-color cable and disconnect it from the motherboard.
Step 7
- Lift the battery out of the laptop.
Lift the battery out of the laptop.
Step 8
LED Screen
- Unplug the black and white cable from the motherboard.
- These two wires connect to the antenna within the display assembly. The white cable is longer and connects to the bottom import.
Unplug the black and white cable from the motherboard.
These two wires connect to the antenna within the display assembly. The white cable is longer and connects to the bottom import.
Step 9
- Peel back the tape covering the plug.
- Slide the cable towards the screen and out of the input.
Peel back the tape covering the plug.
Slide the cable towards the screen and out of the input.
Step 10
- Unscrew the 6 screws (5 millimeter) on the top right and left.
Unscrew the 6 screws (5 millimeter) on the top right and left.
Step 11
- Gently lift the screen up and away from the laptop.
Gently lift the screen up and away from the laptop.
Step 12
- Pry off the face panel on the screen using the blue prying tool.
Pry off the face panel on the screen using the blue prying tool.
Step 13
- Remove the four 2mm Phillips #0 screws from the four corners of the screen.
Remove the four 2mm Phillips #0 screws from the four corners of the screen.
Step 14
- Gently lift screen
- Peel back the adhesive covering the cable.
- Remove the cable to free the screen.
Gently lift screen
Peel back the adhesive covering the cable.
Remove the cable to free the screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Celina Monteiro
Member since: 10/17/2017
224 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S1-G7, Simcock Fall 2017
Member of UMass Dartmouth, Team S1-G7, Simcock Fall 2017
UMASSD-SIMCOCK-F17S1G7
3 Members
9 Guides authored
Glorybringers Child - Dec 8, 2019
Reply
I used this honestly I broke the screen and some of the wires in the screen are severed. Now I know for sure where the wires go and how to deconstruct it. Thank you so much!
