Difficulty
Easy
Steps
12
Time Required
5 minutes
Sections
3
- Keyboard
- 4 steps
- Battery
- 3 steps
- VECO Speakers
- 5 steps
Flags
0
BackAsus Chromebook C300SA-DS02
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Power the laptop off and make sure the charger is unplugged before starting.
- Remove the eight 8.0mm Phillips #0 screws on the bottom of the laptop.
- Remove the three 6.0mm Phillips #0 screws.
Power the laptop off and make sure the charger is unplugged before starting.
Remove the eight 8.0mm Phillips #0 screws on the bottom of the laptop.
Remove the three 6.0mm Phillips #0 screws.
1024
Step 2
- Open the laptop.
- Using an iFixit opening tool, pry along the edges of the keyboard.
- Lift the keyboard and slide it gently towards you.
- Do not completely remove the keyboard. It is still connected to the back panel by a pair of ribbon cables.
Open the laptop.
Using an iFixit opening tool, pry along the edges of the keyboard.
Lift the keyboard and slide it gently towards you.
Do not completely remove the keyboard. It is still connected to the back panel by a pair of ribbon cables.
Step 3
- Disconnect the two ZIF connectors by prying up the locking bar with a spudger and removing the ribbon cable.
Disconnect the two ZIF connectors by prying up the locking bar with a spudger and removing the ribbon cable.
Step 4
- Remove the keyboard from the laptop.
Remove the keyboard from the laptop.
Step 5
Battery
- Remove the six 5.6mm Phillips #0 screws around the battery.
Remove the six 5.6mm Phillips #0 screws around the battery.
Step 6
- Using your thumb and index finger, pinch the multi-color cable and disconnect it from the motherboard.
Using your thumb and index finger, pinch the multi-color cable and disconnect it from the motherboard.
Step 7
- Lift the battery out of the laptop.
Lift the battery out of the laptop.
Step 8
VECO Speakers
- Unplug the speaker cable from the motherboard.
Unplug the speaker cable from the motherboard.
Step 9
- Start by removing the right speaker first.
- There are two metal clips and one plastic clip holding the right speaker in place. Push them back and lift speaker out of the laptop.
- Use a screwdriver to gently push back the metal clips.
Start by removing the right speaker first.
There are two metal clips and one plastic clip holding the right speaker in place. Push them back and lift speaker out of the laptop.
Use a screwdriver to gently push back the metal clips.
Step 10
- Untangle the wire connecting the right speaker to the left speaker.
- Move right speaker and wires away from your working space.
- Do not lift wire straight up, there are five interlocking ribs holding this wire in place.
Untangle the wire connecting the right speaker to the left speaker.
Move right speaker and wires away from your working space.
Do not lift wire straight up, there are five interlocking ribs holding this wire in place.
Step 11
- There are two metal clips and one plastic clip holding the right speaker in place. Push them back and lift speaker out of the laptop.
- You can use a screwdriver to push back the clips if needed.
You can use a screwdriver to push back the clips if needed.
Step 12
- Lift speakers and cable away from the laptop.
Lift speakers and cable away from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Sam LaBelle
Member since: 10/17/2017
107 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team S1-G7, Simcock Fall 2017
Member of UMass Dartmouth, Team S1-G7, Simcock Fall 2017
UMASSD-SIMCOCK-F17S1G7
3 Members
9 Guides authored
