Difficulty
Moderate
Steps
9
Time Required
30 - 40 minutes
Sections
3
- Keyboard
- 4 steps
- Battery
- 3 steps
- WiFi Card
- 2 steps
Flags
0
BackAsus Chromebook C300SA-DS02
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Power the laptop off and make sure the charger is unplugged before starting.
- Remove the eight 8.0mm Phillips #0 screws on the bottom of the laptop.
- Remove the three 6.0mm Phillips #0 screws.
Power the laptop off and make sure the charger is unplugged before starting.
Remove the eight 8.0mm Phillips #0 screws on the bottom of the laptop.
Remove the three 6.0mm Phillips #0 screws.
1024
Step 2
- Open the laptop.
- Using an iFixit opening tool, pry along the edges of the keyboard.
- Lift the keyboard and slide it gently towards you.
- Do not completely remove the keyboard. It is still connected to the back panel by a pair of ribbon cables.
Open the laptop.
Using an iFixit opening tool, pry along the edges of the keyboard.
Lift the keyboard and slide it gently towards you.
Do not completely remove the keyboard. It is still connected to the back panel by a pair of ribbon cables.
Step 3
- Disconnect the two ZIF connectors by prying up the locking bar with a spudger and removing the ribbon cable.
Disconnect the two ZIF connectors by prying up the locking bar with a spudger and removing the ribbon cable.
Step 4
- Remove the keyboard from the laptop.
Remove the keyboard from the laptop.
Step 5
Battery
- Remove the six 5.6mm Phillips #0 screws around the battery.
Remove the six 5.6mm Phillips #0 screws around the battery.
Step 6
- Using your thumb and index finger, pinch the multi-color cable and disconnect it from the motherboard.
Using your thumb and index finger, pinch the multi-color cable and disconnect it from the motherboard.
Step 7
- Lift the battery out of the laptop.
Lift the battery out of the laptop.
Step 8
WiFi Card
- Use the spudger to pop the black and white coaxial WiFi cables up from the WiFi card.
Use the spudger to pop the black and white coaxial WiFi cables up from the WiFi card.
Step 9
- Remove the one 3.6mm Phillips #0 screw from the WiFi card.
- Pull and lift the WiFi card away from the motherboard.
Remove the one 3.6mm Phillips #0 screw from the WiFi card.
Pull and lift the WiFi card away from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Sarah Westberg
Member since: 03/11/2019
16,818 Reputation
65 Guides authored
Badges:
38
+35 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,769 Guides authored