Difficulty

Moderate

Steps

7

Time Required

                          7 - 15 minutes

Sections

2

  • Back Panel
  • 4 steps
  • Battery
  • 3 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackAsus Chromebook Flip C302CA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

A battery is an energy storage device made up of two or more electrochemical cells that convert stored chemical energy into electrical energy and are used as a power source. As a result, it is important to take care of your laptop battery because your laptop cannot function without it.

Nonetheless, make sure your laptop is turned off and unplugged from any outlets before you begin removing the components.

It is best if you gather all of your tools in one place before beginning to replace this component. We recommend that you use the iFixit Magnetic Project Mat to keep your screws organized. Choose a location where there will be no children to interrupt you to prevent them from using tools that could harm them.

What you need

Step 1

              Back Panel
  • Turn the laptop over so the bottom is facing you.

Turn the laptop over so the bottom is facing you.

1024

Step 2

  • Remove two rubber caps on the top.
  • Remove the two 1 mm screws using the Phillips #00 screwdriver.

Remove two rubber caps on the top.

Remove the two 1 mm screws using the Phillips #00 screwdriver.

Step 3

  • Remove the ten 2 mm screws from the back panel using a T5 Torx screwdriver.
  • Carefully remove the back panel using an opening pick.

Remove the ten 2 mm screws from the back panel using a T5 Torx screwdriver.

Carefully remove the back panel using an opening pick.

Step 4

  • Remove the back panel from the laptop.

Remove the back panel from the laptop.

Step 5

              Battery
  • Remove the sticker holding the cable using a pair of tweezers.
  • Detach the cable from the motherboard by lifting it up with a spudger.
  • Always use a plastic or nylon ESD-safe tool. Metal spudger and other sharp tools can puncture a battery, potentially causing a fire.

Remove the sticker holding the cable using a pair of tweezers.

Detach the cable from the motherboard by lifting it up with a spudger.

Always use a plastic or nylon ESD-safe tool. Metal spudger and other sharp tools can puncture a battery, potentially causing a fire.

Step 6

  • Remove the two 2 mm screws holding the battery using a Phillips #00 screwdriver.

Remove the two 2 mm screws holding the battery using a Phillips #00 screwdriver.

Step 7

  • Carefully lift up the battery from the front side to remove it from the laptop.

Carefully lift up the battery from the front side to remove it from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Zahid Enriquez

Member since: 02/08/2022

465 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Gateway, Team 1-2, Saknee Spring 2022                        

                                                  Member of Gateway, Team 1-2, Saknee Spring 2022 



                    GCC-SAKNEE-S22S1G2                     


                                            4 Members                     


                                            5 Guides authored