Difficulty

Moderate

Steps

13

Time Required

Suggest a time??

Sections

2

  • Back Panel
  • 4 steps
  • Display
  • 9 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackAsus Chromebook Flip C302CA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Panel
  • Turn the laptop over so the bottom is facing you.

Turn the laptop over so the bottom is facing you.

1024

Step 2

  • Remove two rubber caps on the top.
  • Remove the two 1 mm screws using the Phillips #00 screwdriver.

Remove two rubber caps on the top.

Remove the two 1 mm screws using the Phillips #00 screwdriver.

Step 3

  • Remove the ten 2 mm screws from the back panel using a T5 Torx screwdriver.
  • Carefully remove the back panel using an opening pick.

Remove the ten 2 mm screws from the back panel using a T5 Torx screwdriver.

Carefully remove the back panel using an opening pick.

Step 4

  • Remove the back panel from the laptop.

Remove the back panel from the laptop.

Step 5

              Display
  • Remove the black display ports from the motherboard.

Remove the black display ports from the motherboard.

Step 6

  • Remove the six 2.54 mm Phillips screws from the left and right screen hinge brackets.

Remove the six 2.54 mm Phillips screws from the left and right screen hinge brackets.

Step 7

  • Remove the display unit.

Remove the display unit.

Step 8

  • Use heat gun to loosen up adhesive on rubber covers for screw.

Use heat gun to loosen up adhesive on rubber covers for screw.

Step 9

  • Remove rubber covers.

Remove rubber covers.

Step 10

  • Remove the two 2.5 mm screws.

Remove the two 2.5 mm screws.

Step 11

  • Use prying tool to separate panel from monitor.

Use prying tool to separate panel from monitor.

Step 12

  • Remove this connection by pulling to separate it from the monitor.

Remove this connection by pulling to separate it from the monitor.

Step 13

  • Remove connection point and the entire camera assembly including wires.

Remove connection point and the entire camera assembly including wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    NICKO SANTOS SALEM

Member since: 10/03/2022

529 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       The Citadel Military College of South Carolina, Team 1-12, Eggleston Fall 2022                        

                                                  Member of The Citadel Military College of South Carolina, Team 1-12, Eggleston Fall 2022 



                    CMCSC-EGGLESTON-F22S1G12                     


                                            3 Members                     


                                            3 Guides authored