Difficulty
Easy
Steps
6
Time Required
5 - 10 minutes
Sections
1
- Power Supply
- 6 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackASUS Essentio CM1745
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Powering Off
- Before opening your desktop PC, make sure to turn it off using the power button.
- After powering it off, unplug the power cable.
Before opening your desktop PC, make sure to turn it off using the power button.
After powering it off, unplug the power cable.
1024
Step 2
Side Panel
- Unscrew the 2 Phillips screws as shown.
- After removing screws, slide the panel off using the handle.
Unscrew the 2 Phillips screws as shown.
After removing screws, slide the panel off using the handle.
Step 3
Power Supply
- Locate the power supply unit which was connected to the cable unplugged in Step 1.
Locate the power supply unit which was connected to the cable unplugged in Step 1.
Step 4
PSU Screws
- Unscrew Phillips screws from back of the desktop PC.
Unscrew Phillips screws from back of the desktop PC.
Step 5
PSU Cables
- Unplug all attached cables from the Power Supply, then unplug the cable attached to the Motherboard inside the PC.
Unplug all attached cables from the Power Supply, then unplug the cable attached to the Motherboard inside the PC.
Step 6
Replacement
- Once unplugged, you can plug in the cables into the new Power Supply and Motherboard.
Once unplugged, you can plug in the cables into the new Power Supply and Motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Aaron Stanfield
Member since: 03/28/2021
163 Reputation
1 Guide authored
Badges:
2