Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
1
- RAM
- 6 steps
Flags
0
BackAsus Eee PC 1000HA
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Remove the battery before working on your device. See this LINK for a step-by-step guide.
- Gently turn the laptop up side down so that the battery is facing away from you. The battery is outlined by the red rectangle in the picture to the left.
Remove the battery before working on your device. See this LINK for a step-by-step guide.
Gently turn the laptop up side down so that the battery is facing away from you. The battery is outlined by the red rectangle in the picture to the left.
1024
Step 2
- Use a #00 Phillips Head screw driver to remove the two 1/4" screws that hold the back panel in place.
Use a #00 Phillips Head screw driver to remove the two 1/4" screws that hold the back panel in place.
Step 3
- Place the blue plastic 1/4" opening tool into the small indention and gently pry the back panel off.
Place the blue plastic 1/4" opening tool into the small indention and gently pry the back panel off.
Step 4
- Remove the back panel.
- The RAM is shown by the orange marker.
Remove the back panel.
The RAM is shown by the orange marker.
Step 5
- Push the two silver tabs outwards and the RAM will pop up to be removed.
Push the two silver tabs outwards and the RAM will pop up to be removed.
Step 6
- Gently pull the RAM outwards to remove.
Gently pull the RAM outwards to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Ashlee Stickle
Member since: 10/13/2015
675 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
Sam Houston State, Team 1-1, Blackburne Fall 2015
Member of Sam Houston State, Team 1-1, Blackburne Fall 2015
SHSU-BLACKBURNE-F15S1G1
3 Members
10 Guides authored
