Featured

Featured Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 - 15 minutes

Sections

2

  • Battery
  • 2 steps
  • Screen
  • 5 steps

Flags

1

This guide has been found to be exceptionally cool by the iFixit staff.

  • BackAsus Eee PC 1005HA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Lay the laptop upside down.
  • Locate the two battery lock tabs.

Lay the laptop upside down.

Locate the two battery lock tabs.

1024

Step 2

  • Slide the tabs outward to unlock the battery.
  • The left tab will remain unlocked, while the right tab must be held.
  • Holding the right tab open, slide the battery out of the laptop.

Slide the tabs outward to unlock the battery.

The left tab will remain unlocked, while the right tab must be held.

Holding the right tab open, slide the battery out of the laptop.

Step 3

              Screen
  • Using tweezers, remove the six screw covers on the screen bezel.
  • Remove the six 4.6 mm screws from the bezel.

Using tweezers, remove the six screw covers on the screen bezel.

Remove the six 4.6 mm screws from the bezel.

Step 4

  • Use a plastic opening tool to disengage the plastic clips that secure the screen bezel to the display.
  • Carefully remove the bezel from the display.

Use a plastic opening tool to disengage the plastic clips that secure the screen bezel to the display.

Carefully remove the bezel from the display.

Step 5

  • Remove the four 3.6 mm screws securing the screen.
  • Slowly lift the screen up from the rest of the laptop.
  • The screen is still attached to the laptop by a set of cables. Be careful not to damage them while removing the screen.

Remove the four 3.6 mm screws securing the screen.

Slowly lift the screen up from the rest of the laptop.

The screen is still attached to the laptop by a set of cables. Be careful not to damage them while removing the screen.

Step 6

  • Remove the plastic tape securing the display cables to the back of the screen.
  • Slide the display cable connector out its socket on the back of the screen.

Remove the plastic tape securing the display cables to the back of the screen.

Slide the display cable connector out its socket on the back of the screen.

Step 7

  • Remove the four 3.1 mm housing screws on the sides of the display housing frame
  • Remove the housing frame.

Remove the four 3.1 mm housing screws on the sides of the display housing frame

Remove the housing frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      13 other people completed this guide.

Author

                                      with 8 other contributors 


                    Mitchell Cesare

Member since: 01/31/2012

784 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 11-22, Maness Winter 2012                        

                                                  Member of Cal Poly, Team 11-22, Maness Winter 2012 



                    CPSU-MANESS-W12S11G22                     


                                            3 Members                     


                                            12 Guides authored