Difficulty

Easy

Steps

4

Time Required

                          2 minutes

Sections

2

  • Battery
  • 1 step
  • RAM Module
  • 3 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackAsus Eee PC 1005PXD-BLK024S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the battery
  • The first thing you should do when disassembling electronic devices in general is to disconnect it from any power source. Make sure the AC adapter isn’t connected to the laptop before you start.
  • Turn the laptop upside down, with the battery side closest to you. Unlock the left slider by pressing it to the left. It will stay in this position.
  • Now slide the right slider to the right. This one won’t lock in position, so you must slide the battery towards you while pressing this slider to the right to remove it.

The first thing you should do when disassembling electronic devices in general is to disconnect it from any power source. Make sure the AC adapter isn’t connected to the laptop before you start.

Turn the laptop upside down, with the battery side closest to you. Unlock the left slider by pressing it to the left. It will stay in this position.

Now slide the right slider to the right. This one won’t lock in position, so you must slide the battery towards you while pressing this slider to the right to remove it.

1024

Step 2

              Remove the cover
  • Unscrew the Phillips screw holding the RAM module cover.
  • Carefully lift the cover, so not to break any of the 3 plastic tabs holding it to the bottom cover of the laptop (two on the left, one on the right).

Unscrew the Phillips screw holding the RAM module cover.

Carefully lift the cover, so not to break any of the 3 plastic tabs holding it to the bottom cover of the laptop (two on the left, one on the right).

Step 3

              Unlock the RAM module
  • Push the two metal brackets holding the module to the side, away from the module. This will make it pop up.

Push the two metal brackets holding the module to the side, away from the module. This will make it pop up.

Step 4

              Remove the RAM module
  • Grab the RAM module and pull it to the left.
  • You now have an empty RAM slot where you can place your replacement module.

Grab the RAM module and pull it to the left.

You now have an empty RAM slot where you can place your replacement module.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    João Pedro Almeida

Member since: 02/05/2018

546 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges