Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
2
- Battery
- 3 steps
- Graphics Card
- 2 steps
Flags
0
BackAsus Eee PC 1008ha
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Using the plastic opening tool, carefully pry the top panel from the base.
Using the plastic opening tool, carefully pry the top panel from the base.
1024
Step 2
- Lift the side of the keyboard.
- Disconnect the attached ribbon located underneath the keyboard.
- Place your index finger in the hole on the right side of the keyboard tray and lift the tray.
Lift the side of the keyboard.
Disconnect the attached ribbon located underneath the keyboard.
Place your index finger in the hole on the right side of the keyboard tray and lift the tray.
Step 3
- Use your fingers to lift the battery and gently disconnect the wires from the base.
Use your fingers to lift the battery and gently disconnect the wires from the base.
Step 4
Graphics Card
- Remove the two 2mm screws from the graphics card.
Remove the two 2mm screws from the graphics card.
Step 5
- Flip over the graphics card.
- Pull the black plastic locking mechanism towards the golden ribbon to unlock.
- Pull out the ribbon.
Flip over the graphics card.
Pull the black plastic locking mechanism towards the golden ribbon to unlock.
Pull out the ribbon.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 8 other contributors
Alex Powers
Member since: 04/17/2013
101 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 21-52, Johann Spring 2013
Member of Cal Poly, Team 21-52, Johann Spring 2013
CPSU-JOHANN-S13S21G52
4 Members
11 Guides authored
JUAN LUIS GARCIA BRAVO - Mar 26, 2014
Reply
Is this the graphics card?
Is this pc has no integrated graphics card?