Difficulty
Moderate
Steps
16
Time Required
2 hours
Sections
1
- Motherboard
- 16 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackAsus EEE PC 1015PN
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- To remove the battery, unlock the marked tabs.
To remove the battery, unlock the marked tabs.
1024
Step 2
- To remove the memory, lift the plastic tab covering the memory screw with a small slot head screwdriver.
To remove the memory, lift the plastic tab covering the memory screw with a small slot head screwdriver.
Step 3
- Lift the plastic cover and remove the SO-DIMM module.
Lift the plastic cover and remove the SO-DIMM module.
Step 4
- Remove the dummy SD-Card
Remove the dummy SD-Card
Step 5
- Unscrew 4 screws that are located in the battery compartment. Once removed, plastic tabs need to be removed on the upper part.
Unscrew 4 screws that are located in the battery compartment. Once removed, plastic tabs need to be removed on the upper part.
Step 6
- With an extraction tool, separate the keyboard chassis from the netbook, it has many tabs.
With an extraction tool, separate the keyboard chassis from the netbook, it has many tabs.
Step 7
- While separating the keyboard chassis, be careful with the keyboard connector. To remove it, simply slide the plastic retainer to be able to free it.
While separating the keyboard chassis, be careful with the keyboard connector. To remove it, simply slide the plastic retainer to be able to free it.
Step 8
- Unscrew the marked screws. One of those screws is behind a warranty sticker.
Unscrew the marked screws. One of those screws is behind a warranty sticker.
Step 9
- Disconnect the mouse connector. The connector has a white plastic tab that disconnects the connector.
Disconnect the mouse connector. The connector has a white plastic tab that disconnects the connector.
Step 10
- With a flat screwdriver, release two plastic tabs ( 1 on each side), and with pressure in the front, release the chassis.
With a flat screwdriver, release two plastic tabs ( 1 on each side), and with pressure in the front, release the chassis.
Step 11
- To disconnect the hard drive, two connectors need to be removed, pay attention to the connectors sides, the one on the left in marked as MB and the right is marked as IO.
To disconnect the hard drive, two connectors need to be removed, pay attention to the connectors sides, the one on the left in marked as MB and the right is marked as IO.
Step 12
- Remove the screws, and slide the hard drive free.
Remove the screws, and slide the hard drive free.
Step 13
- Disconnect the motherboard connector and the IO plate.
Disconnect the motherboard connector and the IO plate.
Step 14
- Remove the fan connector, the BIOS battery and the upper connector.
Remove the fan connector, the BIOS battery and the upper connector.
Step 15
- Remove the plate screws and release the screen connector.
Remove the plate screws and release the screen connector.
Step 16
- Remove the motherboard from the chassis, and disconnect a connector that is glued.
Remove the motherboard from the chassis, and disconnect a connector that is glued.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
DeZom is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
DeZom
Author
with 3 other contributors
Jorge Casal Lopez
Member since: 05/09/2013
313 Reputation
1 Guide authored
Badges:
6
+3 more badges
Rafael Belmonte - May 24, 2016
Reply
Joder la que hay que liar para cambiar el disco duro.
ilcaccillo - Apr 25, 2020
Reply
Thank you for the guide