Difficulty
Moderate
Steps
11
Time Required
1 hour
Sections
1
- Cooling fan
- 11 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackAsus eeepc 1015px
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Cooling fan
- Remove the battery.
Remove the battery.
1024
Step 2
- unscrew the 4 screws, purple arrow
unscrew the 4 screws, purple arrow
Step 3
- use a screwdriver to press in the 2 slots to unlock the keyboard hooks
use a screwdriver to press in the 2 slots to unlock the keyboard hooks
Step 4
- pry up the 2 side points to release the joints
- Using a flat opening tool, unclip the keyboard along the perimeter
pry up the 2 side points to release the joints
Using a flat opening tool, unclip the keyboard along the perimeter
Step 5
- unhook the keyboard
- Disconnect the ribbon cable by opening the 2 black side latches
unhook the keyboard
Disconnect the ribbon cable by opening the 2 black side latches
Step 6
- Disconnect the 2 ribbon cables
Disconnect the 2 ribbon cables
Step 7
- remove the screws, including the one under the yellow sticker
remove the screws, including the one under the yellow sticker
Step 8
- Pry in the 2 points. Using a flat tool release the trackpad block along the perimeter
Pry in the 2 points. Using a flat tool release the trackpad block along the perimeter
Step 9
- unhook and remove the mouse block
unhook and remove the mouse block
Step 10
- Remove heatsink and fan screws
- Unhook fan ribbon cable
Remove heatsink and fan screws
Unhook fan ribbon cable
Step 11
- carefully clean the old Arctic cooling paste on the processor and heatsink
- before reassembling put some new Arctic paste
- To replace or remove HDD, unhook the 2 ribbon cables (purple arrow). Remove 2 screws (yellow arrow)
carefully clean the old Arctic cooling paste on the processor and heatsink
before reassembling put some new Arctic paste
To replace or remove HDD, unhook the 2 ribbon cables (purple arrow). Remove 2 screws (yellow arrow)
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
irlanda
albertob
Author
Smilzo
Member since: 11/09/2013
10,473 Reputation
39 Guides authored
Badges:
23
+20 more badges
