Asus Eee Pc 1201N Display Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 - 50 minutes

Sections

Battery
3 steps
Display
6 steps

Flags

BackAsus Eee PC 1201N
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Flip the netbook over.
Be sure to unplug the netbook and power off the device while working.

Flip the netbook over.

Be sure to unplug the netbook and power off the device while working.

1024

Step 2

Push open both tabs on either side of the battery.
The tab on the left will click open and stay in place until you close it.

Push open both tabs on either side of the battery.

The tab on the left will click open and stay in place until you close it.

Step 3

Pull the tab on the right open, while you remove battery with your other hand.
Pull the battery straight out ensuring that you don’t damage any connectors.

Pull the tab on the right open, while you remove battery with your other hand.

Pull the battery straight out ensuring that you don’t damage any connectors.

Step 4

              Display

Remove the six screw on the front cover by using the plastic opening tool. Then, remove the six 4.6mm screws using the J0 Phillips head screwdriver.

Remove the six screw on the front cover by using the plastic opening tool. Then, remove the six 4.6mm screws using the J0 Phillips head screwdriver.

Step 5

Using the plastic opening tool, separate the over from the netbook.

Using the plastic opening tool, separate the over from the netbook.

Step 6

You must separate the hinge cover from the cover before removing the cover.

You must separate the hinge cover from the cover before removing the cover.

Step 7

After removing the cover, remove the two 4.6mm screws using the J0 Phillips head screwdriver.

After removing the cover, remove the two 4.6mm screws using the J0 Phillips head screwdriver.

Step 8

There are two screws on the left and right side of the display. Remove all four 3mm screws using the J0 Phillips head to separate the LCD from the display cover.
The left side will have a magnet covering the bottom screw remove the magnet. Be sure to replace when reassembling.

There are two screws on the left and right side of the display. Remove all four 3mm screws using the J0 Phillips head to separate the LCD from the display cover.

The left side will have a magnet covering the bottom screw remove the magnet. Be sure to replace when reassembling.

Step 9

Pull up on the video cable on the back of the LCD display to remove it.

Pull up on the video cable on the back of the LCD display to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Mohamed Al Mardhouf Al Saadi

Member since: 10/04/2016

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       USF Tampa, Team 2-3, Nance Fall 2016                        

                                                  Member of USF Tampa, Team 2-3, Nance Fall 2016 



                    USFT-NANCE-F16S2G3                     


                                            4 Members                     


                                            12 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team