Difficulty
Moderate
Steps
10
Time Required
15 minutes
Sections
3
- Battery
- 3 steps
- Keyboard
- 2 steps
- Hard Drive
- 5 steps
Flags
0
BackAsus Eee PC 1201N
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the netbook over.
- Be sure to unplug the netbook and power off the device while working.
Flip the netbook over.
Be sure to unplug the netbook and power off the device while working.
1024
Step 2
- Push open both tabs on either side of the battery.
- The tab on the left will click open and stay in place until you close it.
Push open both tabs on either side of the battery.
The tab on the left will click open and stay in place until you close it.
Step 3
- Pull the tab on the right open, while you remove battery with your other hand.
- Pull the battery straight out ensuring that you don’t damage any connectors.
Pull the tab on the right open, while you remove battery with your other hand.
Pull the battery straight out ensuring that you don’t damage any connectors.
Step 4
Keyboard
- Open the netbook to find the four small grooves along the top of the keyboard.
- Pry the keyboard up using the plastic opening tool.
Open the netbook to find the four small grooves along the top of the keyboard.
Pry the keyboard up using the plastic opening tool.
Step 5
- Tilt the keyboard away from you to access the connector. Gently push the lock toward the screen to unlock it and slide the ribbon out.
- Remove the keyboard.
Tilt the keyboard away from you to access the connector. Gently push the lock toward the screen to unlock it and slide the ribbon out.
Remove the keyboard.
Step 6
Hard Drive
- Turn the netbook over and remove the eight 6.5mm screws using the J0 Phillips head screwdriver.
Turn the netbook over and remove the eight 6.5mm screws using the J0 Phillips head screwdriver.
Step 7
- Turn the netbook back over and remove the ten 4.5mm screws using the J0 Phillips head screwdriver.
- Remove the cover plate by sliding the plastic opening tool around the entire edge of the plate.
Turn the netbook back over and remove the ten 4.5mm screws using the J0 Phillips head screwdriver.
Remove the cover plate by sliding the plastic opening tool around the entire edge of the plate.
Step 8
- Flip up the retaining flap on the ZIF connector. Then, pull the blue tab for the touchpad connector before removing the cover plate completely.
Flip up the retaining flap on the ZIF connector. Then, pull the blue tab for the touchpad connector before removing the cover plate completely.
Step 9
- Remove the four 4.6mm screws with the J0 Phillips head screwdriver.
Remove the four 4.6mm screws with the J0 Phillips head screwdriver.
Step 10
- Slide the hard drive to the right and then lift it straight out of the netbook.
Slide the hard drive to the right and then lift it straight out of the netbook.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Trae Mikesell
Member since: 10/04/2016
394 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 2-3, Nance Fall 2016
Member of USF Tampa, Team 2-3, Nance Fall 2016
USFT-NANCE-F16S2G3
4 Members
12 Guides authored