Difficulty

Moderate

Steps

8

Time Required

                          25 - 30 minutes

Sections

2

  • Battery
  • 2 steps
  • RAM
  • 6 steps

Flags

0

  • BackAsus Eee PC 900

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Slide the battery’s locking tabs from the locked position to unlocked positions.
  • The right tab is unlocked when a red dot is showing.
  • The left tab will have to be held in the unlocked position in order to release the battery.

Slide the battery’s locking tabs from the locked position to unlocked positions.

The right tab is unlocked when a red dot is showing.

The left tab will have to be held in the unlocked position in order to release the battery.

1024

Step 2

  • Slide the battery out while holding the left locking tab in the unlocked position.

Slide the battery out while holding the left locking tab in the unlocked position.

Step 3

              RAM
  • Remove the sticker from the RAM compartment using a pair of tweezers.

Remove the sticker from the RAM compartment using a pair of tweezers.

Step 4

  • Remove the two 4.8 mm screws using a Phillips #0 screwdriver.

Remove the two 4.8 mm screws using a Phillips #0 screwdriver.

Step 5

  • Open up the cover from the bottom by carefully prying it open with a plastic opening tool.
  • Be gentle when prying open the cover in order to not damage it.

Open up the cover from the bottom by carefully prying it open with a plastic opening tool.

Be gentle when prying open the cover in order to not damage it.

Step 6

  • Remove the back cover by pulling up on the side that had the screws.

Remove the back cover by pulling up on the side that had the screws.

Step 7

  • Use a spudger to push the top of the pin on the right towards the right (so it isn’t holding the RAM chip).
  • Do the same for the left pin. Push the top of the pin towards the left.
  • The RAM should pop up.

Use a spudger to push the top of the pin on the right towards the right (so it isn’t holding the RAM chip).

Do the same for the left pin. Push the top of the pin towards the left.

The RAM should pop up.

Step 8

  • Remove the RAM chip by grabbing the top of the chip and pulling it upwards.
  • Be gentle when removing the RAM because it is a very delicate part and you do not want to break any of the pins in the computer.

Remove the RAM chip by grabbing the top of the chip and pulling it upwards.

Be gentle when removing the RAM because it is a very delicate part and you do not want to break any of the pins in the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 10 other contributors 


                    Brian Carreon

Member since: 01/25/2012

288 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 3-27, Amido Winter 2012                        

                                                  Member of Cal Poly, Team 3-27, Amido Winter 2012 



                    CPSU-AMIDO-W12S3G27                     


                                            4 Members                     


                                            16 Guides authored