Difficulty
Moderate
Steps
13
Time Required
30 minutes
Sections
3
- Battery
- 4 steps
- Keyboard
- 2 steps
- Fan
- 7 steps
Flags
0
BackAsus Eee PC T101MT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Before you begin, make sure your device is powered off and not connected to the power supply.
- Turn the tablet over and position it so it matches the picture.
Before you begin, make sure your device is powered off and not connected to the power supply.
Turn the tablet over and position it so it matches the picture.
1024
Step 2
- Locate the sliding tab on the right and slide it to the left in order to unlock the battery.
Locate the sliding tab on the right and slide it to the left in order to unlock the battery.
Step 3
- Use a plastic opening tool to lift the battery up as you slide the tab on the left to the right.
Use a plastic opening tool to lift the battery up as you slide the tab on the left to the right.
Step 4
- Lift the battery out of the device.
Lift the battery out of the device.
Step 5
Keyboard
- Turn the tablet over and open it up. Insert a nylon spudger into the slots above F1, F6, F10 to pry up the keyboard.
Turn the tablet over and open it up. Insert a nylon spudger into the slots above F1, F6, F10 to pry up the keyboard.
Step 6
- Once you have the keyboard out, use the nylon spudger to remove the connection. You can now replace the keyboard.
Once you have the keyboard out, use the nylon spudger to remove the connection. You can now replace the keyboard.
Step 7
Fan
- Peel the black strip off of the back of your Asus Eee PC T101MT to expose more screws. Remove screws from the outside of the device case (ten 7mm screws and two 8mm screws).
Peel the black strip off of the back of your Asus Eee PC T101MT to expose more screws. Remove screws from the outside of the device case (ten 7mm screws and two 8mm screws).
Step 8
- Remove the four 3mm screws from underneath the battery.
Remove the four 3mm screws from underneath the battery.
Step 9
- Remove the screws from under the keyboard. (Two 7mm and five 5mm)
Remove the screws from under the keyboard. (Two 7mm and five 5mm)
Step 10
- Use a plastic opening tool to pry the case open and remove it.
Use a plastic opening tool to pry the case open and remove it.
Step 11
- Locate the fan and remove the screws (3mm).
Locate the fan and remove the screws (3mm).
Step 12
- Use a spudger to remove the power supply.
Use a spudger to remove the power supply.
Step 13
- Remove and replace the fan.
Remove and replace the fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Jarnell Miranda
Member since: 10/17/2015
657 Reputation
5 Guides authored
Badges:
13
+10 more badges
Team
Gateway, Team 1-1, Kuhn Fall 2015
Member of Gateway, Team 1-1, Kuhn Fall 2015
GCC-KUHN-F15S1G1
1 Member
10 Guides authored