Difficulty

Easy

Steps

9

Time Required

                          3 minutes

Sections

2

  • Battery
  • 4 steps
  • RAM
  • 5 steps

Flags

0

  • BackAsus Eee PC T101MT

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Before you begin, make sure your device is powered off and not connected to the power supply.
  • Turn the tablet over and position it so it matches the picture.

Before you begin, make sure your device is powered off and not connected to the power supply.

Turn the tablet over and position it so it matches the picture.

1024

Step 2

  • Locate the sliding tab on the right and slide it to the left in order to unlock the battery.

Locate the sliding tab on the right and slide it to the left in order to unlock the battery.

Step 3

  • Use a plastic opening tool to lift the battery up as you slide the tab on the left to the right.

Use a plastic opening tool to lift the battery up as you slide the tab on the left to the right.

Step 4

  • Lift the battery out of the device.

Lift the battery out of the device.

Step 5

              RAM
  • Locate the compartment where the RAM is stored.

Locate the compartment where the RAM is stored.

Step 6

  • Grab a drive adapter and a PH0 phillips head bit and use the screwdriver to remove the 5mm screw from the cover of the compartment.

Grab a drive adapter and a PH0 phillips head bit and use the screwdriver to remove the 5mm screw from the cover of the compartment.

Step 7

  • Use a plastic opening tool to remove the cover.

Use a plastic opening tool to remove the cover.

Step 8

  • In order to release the RAM module, you will need to move the metal tabs on both sides at the same time. This can be accomplished by using plastic opening tools or your fingers.

In order to release the RAM module, you will need to move the metal tabs on both sides at the same time. This can be accomplished by using plastic opening tools or your fingers.

Step 9

  • Once you move the tabs, the RAM module will pop up and you can remove it with your fingers so you can put in a replacement.

Once you move the tabs, the RAM module will pop up and you can remove it with your fingers so you can put in a replacement.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Jarnell Miranda

Member since: 10/17/2015

657 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Gateway, Team 1-1, Kuhn Fall 2015                        

                                                  Member of Gateway, Team 1-1, Kuhn Fall 2015 



                    GCC-KUHN-F15S1G1                     


                                            1 Member                     


                                            10 Guides authored