Difficulty

Moderate

Steps

9

Time Required

                          35 minutes

Sections

3

  • Battery
  • 4 steps
  • Keyboard
  • 2 steps
  • Wireless Network Interface Card
  • 3 steps

Flags

0

  • BackAsus Eee PC T101MT

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Before you begin, make sure your device is powered off and not connected to the power supply.
  • Turn the tablet over and position it so it matches the picture.

Before you begin, make sure your device is powered off and not connected to the power supply.

Turn the tablet over and position it so it matches the picture.

1024

Step 2

  • Locate the sliding tab on the right and slide it to the left in order to unlock the battery.

Locate the sliding tab on the right and slide it to the left in order to unlock the battery.

Step 3

  • Use a plastic opening tool to lift the battery up as you slide the tab on the left to the right.

Use a plastic opening tool to lift the battery up as you slide the tab on the left to the right.

Step 4

  • Lift the battery out of the device.

Lift the battery out of the device.

Step 5

              Keyboard
  • Turn the tablet over and open it up. Insert a nylon spudger into the slots above F1, F6, F10 to pry up the keyboard.

Turn the tablet over and open it up. Insert a nylon spudger into the slots above F1, F6, F10 to pry up the keyboard.

Step 6

  • Once you have the keyboard out, use the nylon spudger to remove the connection. You can now replace the keyboard.

Once you have the keyboard out, use the nylon spudger to remove the connection. You can now replace the keyboard.

Step 7

              Wireless Network Interface Card
  • Locate the wireless NIC (network interface card).

Locate the wireless NIC (network interface card).

Step 8

  • Use a nylon spudger to lift the wireless antenna from the NIC and remove the screws.

Use a nylon spudger to lift the wireless antenna from the NIC and remove the screws.

Step 9

  • Remove and replace the wireless card.

Remove and replace the wireless card.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Jarnell Miranda

Member since: 10/17/2015

657 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Gateway, Team 1-1, Kuhn Fall 2015                        

                                                  Member of Gateway, Team 1-1, Kuhn Fall 2015 



                    GCC-KUHN-F15S1G1                     


                                            1 Member                     


                                            10 Guides authored