Asus Eee Pc701Sd Whi004X Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          4 minutes

Sections

Battery
2 steps
Keyboard
2 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackASUS EEE PC 701SD-WHI004X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Flip the laptop over, you should see two battery tabs.
Slide the right tab towards the right. The orange dot should be visible. This tab will be locked open.

Flip the laptop over, you should see two battery tabs.

Slide the right tab towards the right. The orange dot should be visible. This tab will be locked open.

1024

Step 2

While holding the left tab towards the left. Gently slide the battery out of the laptop.

While holding the left tab towards the left. Gently slide the battery out of the laptop.

Step 3

              Keyboard

Push the 3 tabs at the top of the keyboard in and down one at a time using a nylon spudger.
Once the three tabs have been pushed in, gently pry the top of the keyboard until it begins to hinge out of its slot.
The keyboard is still attached by a cable. Be careful when removing not to damage the cable. Do not yank the keyboard out.

Push the 3 tabs at the top of the keyboard in and down one at a time using a nylon spudger.

Once the three tabs have been pushed in, gently pry the top of the keyboard until it begins to hinge out of its slot.

The keyboard is still attached by a cable. Be careful when removing not to damage the cable. Do not yank the keyboard out.

Step 4

Push the two sides of the ribbon cable connector away from yourself. This will unseat the ribbon cable.
Once the tabs are unseated, you can gently remove the ribbon cable by pulling it out of its slot. The keyboard can now be removed.
To be on the safe side, it’s better to use a nylon spudger, rather than the metal spudger shown in the picture.

Push the two sides of the ribbon cable connector away from yourself. This will unseat the ribbon cable.

Once the tabs are unseated, you can gently remove the ribbon cable by pulling it out of its slot. The keyboard can now be removed.

To be on the safe side, it’s better to use a nylon spudger, rather than the metal spudger shown in the picture.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

mir

Member since: 03/24/2017

394 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       UMass Dartmouth, Team S2-G8, Isaacson Spring 2017                        

                                                  Member of UMass Dartmouth, Team S2-G8, Isaacson Spring 2017 



                    UMASSD-ISAACSON-S17S2G8                     


                                            3 Members                     


                                            10 Guides authored

Incorrect Tools#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Incorrect Tools

Introduction

What you need

Team