Difficulty

Moderate

Steps

9

Time Required

                          30 minutes

Sections

2

  • Battery
  • 5 steps
  • Speakers
  • 4 steps

Flags

0

  • BackAsus EeeBook X205TA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Unscrew all ten 2mm screws located on the bottom of the laptop using a Phillips #2 screwdriver.

Unscrew all ten 2mm screws located on the bottom of the laptop using a Phillips #2 screwdriver.

1024

Step 2

  • Insert the plastic opening tool in the crevice between the back of the laptop and the rest of the case.
  • Carefully pry open the case from several points.
  • Slowly remove the back of the laptop, revealing the parts inside.

Insert the plastic opening tool in the crevice between the back of the laptop and the rest of the case.

Carefully pry open the case from several points.

Slowly remove the back of the laptop, revealing the parts inside.

Step 3

  • Unscrew all six 2mm screws using Philips #2 screws along the edges of the L-Shaped battery.
  • Any tape or cords that run along the battery should be carefully pushed to the side.

Unscrew all six 2mm screws using Philips #2 screws along the edges of the L-Shaped battery.

Any tape or cords that run along the battery should be carefully pushed to the side.

Step 4

  • Disconnect the battery from the motherboard by pulling the No-Fuss Ribbon cables out of the connector.

Disconnect the battery from the motherboard by pulling the No-Fuss Ribbon cables out of the connector.

Step 5

  • Carefully lift the battery out of the laptop.

Carefully lift the battery out of the laptop.

Step 6

              Speakers
  • Locate and lift the tabs from the LED/motherboard ribbon cable.
  • Remove the cable.

Locate and lift the tabs from the LED/motherboard ribbon cable.

Remove the cable.

Step 7

  • Unplug the speaker cable from the motherboard.

Unplug the speaker cable from the motherboard.

Step 8

  • Pry the right speaker gently with the plastic opening tool.

Pry the right speaker gently with the plastic opening tool.

Step 9

  • Pry the left speaker gently with the plastic opening tool.

Pry the left speaker gently with the plastic opening tool.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    William Riggins

Member since: 03/21/2017

312 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       IUPUI, Team S3-G4, Baechle Spring 2017                        

                                                  Member of IUPUI, Team S3-G4, Baechle Spring 2017 



                    IUPUI-BAECHLE-S17S3G4                     


                                            4 Members                     


                                            6 Guides authored

andrew - Sep 28, 2017

Reply

Thank you very much for this detailed and helpful tutorial.

Martin Tolley - Jul 16, 2018

Reply

Thanks. You’ve helped make it clearer for me!

geometry dash