Difficulty
Moderate
Steps
5
Time Required
20 - 25 minutes
Sections
1
- TrackPad
- 5 steps
Flags
0
BackAsus EeeBook X205TA
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
TrackPad
- Remove ten Phillips #00 screws located on the bottom of the laptop:
- Seven short screws.
- Three long screws.
Remove ten Phillips #00 screws located on the bottom of the laptop:
Seven short screws.
Three long screws.
1024
Step 2
- Insert the plastic opening tool in the crevice between the back of the laptop and the rest of the case (where the hinge is).
- Carefully pry open the case from several points.
- Slowly remove the back of the laptop, revealing the parts inside.
Insert the plastic opening tool in the crevice between the back of the laptop and the rest of the case (where the hinge is).
Carefully pry open the case from several points.
Slowly remove the back of the laptop, revealing the parts inside.
Step 3
- Using the 2mm Phillips Screwdriver, carefully unscrew the four screws holding the track pad.
- Using the Phillips #00 Screwdriver, unscrew the three screws holding the track pad.
Using the 2mm Phillips Screwdriver, carefully unscrew the four screws holding the track pad.
Using the Phillips #00 Screwdriver, unscrew the three screws holding the track pad.
Step 4
- Unplug the ZIF connector
Unplug the ZIF connector
Step 5
- Carefully pull the track pad from the side
Carefully pull the track pad from the side
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Lorena Santiago
Member since: 10/06/2016
688 Reputation
4 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team 2-2, Sullivan Fall 2016
Member of USF Tampa, Team 2-2, Sullivan Fall 2016
USFT-SULLIVAN-F16S2G2
3 Members
10 Guides authored