Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

  • Disc Drive
  • 5 steps

Flags

0

  • BackAsus F554LA-WS52

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disc Drive
  • Make sure the notebook is off and has been unplugged from any power source.
  • Flip the notebook over and remove the 10 screws from the back plate with a #0 Phillips head screwdriver.
  • Six (6) will be 9.6mm and four (4) will be 12.7mm.

Make sure the notebook is off and has been unplugged from any power source.

Flip the notebook over and remove the 10 screws from the back plate with a #0 Phillips head screwdriver.

Six (6) will be 9.6mm and four (4) will be 12.7mm.

1024

Step 2

  • With a plastic opening tool, gently lift and remove the back cover to expose the internal components.
  • (Not pictured) Remove the three cables attached to the keyboard and one touch-pad.

With a plastic opening tool, gently lift and remove the back cover to expose the internal components.

(Not pictured) Remove the three cables attached to the keyboard and one touch-pad.

Step 3

  • Unscrew the three 5.7 mm hard drive-motherboard connection screws with a #0 Phillips head screwdriver.
  • Remove the small rectangular hard drive-motherboard connection board.
  • (Not pictured) Remove the hard drive.

Unscrew the three 5.7 mm hard drive-motherboard connection screws with a #0 Phillips head screwdriver.

Remove the small rectangular hard drive-motherboard connection board.

(Not pictured) Remove the hard drive.

Step 4

  • Unscrew the four 5.7 mm battery screws with a #0 Phillips head screwdriver.
  • Remove the battery.

Unscrew the four 5.7 mm battery screws with a #0 Phillips head screwdriver.

Remove the battery.

Step 5

  • Unscrew the two 2.7 mm and one 5.7 mm CD drive screws with the Phillips #00 screwdriver.
  • With the plastic opening tool, gently pry the drive out from the metal brackets that hold it in place.

Unscrew the two 2.7 mm and one 5.7 mm CD drive screws with the Phillips #00 screwdriver.

With the plastic opening tool, gently pry the drive out from the metal brackets that hold it in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Aaron Ratliff

Member since: 10/09/2018

527 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team S1-G2, Leahy Fall 2018                        

                                                  Member of USF Tampa, Team S1-G2, Leahy Fall 2018 



                    USFT-LEAHY-F18S1G2                     


                                            4 Members                     


                                            6 Guides authored