Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

2

  • Keyboard Panel
  • 4 steps
  • Battery
  • 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackASUS F555UA-EH71

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard Panel
  • Remove the ten 18 mm screws holding down the outer shell of the laptop using the Phillips #000 screwdriver.

Remove the ten 18 mm screws holding down the outer shell of the laptop using the Phillips #000 screwdriver.

1024

Step 2

  • Use your fingers to gently pry open the gap between the silver and black parts of the casing.
  • Separate the keyboard panel from the body of the laptop by wedging the iFixit Opening Tool in between the keyboard panel and the body.
  • The teeth of the casing should make a clicking noise as they’re pulled apart.

Use your fingers to gently pry open the gap between the silver and black parts of the casing.

Separate the keyboard panel from the body of the laptop by wedging the iFixit Opening Tool in between the keyboard panel and the body.

The teeth of the casing should make a clicking noise as they’re pulled apart.

Step 3

  • Gently open the casing until the white, silver, and gold power strips are visible. Gently peel the strips from the bottom side of the laptop.
  • Disconnect the two cables connecting the keyboard panel to the laptop.

Gently open the casing until the white, silver, and gold power strips are visible. Gently peel the strips from the bottom side of the laptop.

Disconnect the two cables connecting the keyboard panel to the laptop.

Step 4

  • Remove the keyboard panel from the laptop.

Remove the keyboard panel from the laptop.

Step 5

              Battery
  • Use the Phillips #000 screwdriver to remove the eight 4 mm screws holding the battery in place.

Use the Phillips #000 screwdriver to remove the eight 4 mm screws holding the battery in place.

Step 6

  • Carefully remove the battery from the device.

Carefully remove the battery from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Jared Curtis

Member since: 09/16/2019

263 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Embry-Riddle Aeronautical University, Team S24-G3, McClure Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S24-G3, McClure Fall 2019 



                    ERAU-MCCLURE-F19S24G3                     


                                            4 Members                     


                                            5 Guides authored