Asus F6A X2 Ram Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

Suggest a time??

Sections

Battery
1 step
Back Access Panel
2 steps
RAM
2 steps

Flags

BackAsus F6A-X2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Remove any power cords and turn the laptop off. Attempting to replace part of the laptop while power is running through it may cause electrocution or damage to the device.
Flip laptop face down and rotate so the battery is facing toward you.
The battery is not shown in this picture.
To remove the battery, place one finger on each of the two black slide tabs. Push each tab toward the center of the laptop to release the lock.
Slide the battery toward you and lift it out of the laptop.

Remove any power cords and turn the laptop off. Attempting to replace part of the laptop while power is running through it may cause electrocution or damage to the device.

Flip laptop face down and rotate so the battery is facing toward you.

The battery is not shown in this picture.

To remove the battery, place one finger on each of the two black slide tabs. Push each tab toward the center of the laptop to release the lock.

Slide the battery toward you and lift it out of the laptop.

1024

Step 2

              Back Access Panel

With the laptop facing down, rotate it so the battery pack is facing away from you.
Remove the six 1.5 mm Phillips #1 screws on the back panel of the laptop.

With the laptop facing down, rotate it so the battery pack is facing away from you.

Remove the six 1.5 mm Phillips #1 screws on the back panel of the laptop.

Step 3

Insert a finger into one of the slots on the bottom panel.
Gently lift the upwards, and the back panel of the laptop will come off easily.

Insert a finger into one of the slots on the bottom panel.

Gently lift the upwards, and the back panel of the laptop will come off easily.

Step 4

RAM

Make sure to check the RAM specifications on the device page.
There are two white plastic tabs holding the RAM in place. Place two fingers on each of these tabs, and pull outward.
You will hear a pop and visibly see the RAM move upwards.
Slide the RAM towards the back end of the laptop (the end with the battery), and lift up to remove it.

Make sure to check the RAM specifications on the device page.

There are two white plastic tabs holding the RAM in place. Place two fingers on each of these tabs, and pull outward.

You will hear a pop and visibly see the RAM move upwards.

Slide the RAM towards the back end of the laptop (the end with the battery), and lift up to remove it.

Step 5

Repeat the process from the previous step to remove the bottom RAM.

Repeat the process from the previous step to remove the bottom RAM.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors

                    Jonathan

Member since: 04/24/2014

1,132 Reputation

                                      11 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team 10-56, Amido Spring 2014                        

                                                  Member of Cal Poly, Team 10-56, Amido Spring 2014 



                    CPSU-AMIDO-S14S10G56                     


                                            4 Members                     


                                            12 Guides authored

alainbadinier - Jun 15, 2016

Tutorel simple et très clair.

Merci

Introduction#

What you need#

Team#

Introduction

What you need

Team