Difficulty

Easy

Steps

5

Time Required

                          20 - 25 minutes

Sections

2

  • Battery
  • 2 steps
  • Speakers
  • 3 steps

Flags

4

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAsus G501JW-BHI7N12

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Attach the clip of your anti-static wrist strap to the case of the laptop. This prevents any accidents that could fry the motherboard.
  • Remove the four 7.0mm Philips #0 screws around the battery.

Attach the clip of your anti-static wrist strap to the case of the laptop. This prevents any accidents that could fry the motherboard.

Remove the four 7.0mm Philips #0 screws around the battery.

1024

Step 2

  • Unplug the connector highlighted in this picture by pulling it up and out of it’s seating, then pull the battery away from the motherboard and remove the battery.

Unplug the connector highlighted in this picture by pulling it up and out of it’s seating, then pull the battery away from the motherboard and remove the battery.

Step 3

              Speakers
  • Disconnect the white cables.
  • The first white cable is located above the left speaker. The second and the third white cables are located along the left side of the trackpad.

Disconnect the white cables.

The first white cable is located above the left speaker. The second and the third white cables are located along the left side of the trackpad.

Step 4

  • Using the metal spudger, insert the metal spudger between the speaker and pry up to remove it.

Using the metal spudger, insert the metal spudger between the speaker and pry up to remove it.

Step 5

  • Remove the speakers from both sides following the previous step.

Remove the speakers from both sides following the previous step.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Timothy Goike

Member since: 02/18/2021

277 Reputation

                                      3 Guides authored                  



                       Badges:
                       3

Team

                       The Citadel Military College of South Carolina, Team S2-G20, Eggleston Spring 2021                        

                                                  Member of The Citadel Military College of South Carolina, Team S2-G20, Eggleston Spring 2021 



                    CMCSC-EGGLESTON-S21S2G20                     


                                            3 Members                     


                                            3 Guides authored