Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
2
- Battery
- 2 steps
- Hard Drive
- 2 steps
Flags
0
BackAsus G73JW-XT1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the device over so the battery port is easy to access.
Flip the device over so the battery port is easy to access.
1024
Step 2
- Slide the left slider to the left so that it locks in place.
- Slide the right slider to the right while pushing the battery away from you. The battery should disconnect.
Slide the left slider to the left so that it locks in place.
Slide the right slider to the right while pushing the battery away from you. The battery should disconnect.
Step 3
Hard Drive
- Remove the two 5.5 mm Phillips #0 screws from the back cover.
- Gently lift and remove the back cover.
Remove the two 5.5 mm Phillips #0 screws from the back cover.
Gently lift and remove the back cover.
Step 4
- Remove the four 5.5 mm Phillips #0 screws.
- Gently lift the hard drive starting on the far side.
Remove the four 5.5 mm Phillips #0 screws.
Gently lift the hard drive starting on the far side.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Nathan T Endner
Member since: 09/26/2018
187 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Oregon Institute of Technology, Team S1-G3, Lancaster Fall 2018
Member of Oregon Institute of Technology, Team S1-G3, Lancaster Fall 2018
OIT-LANCASTER-F18S1G3
3 Members
5 Guides authored
