Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- RAM
- 3 steps
Flags
0
BackAsus G74SX-BBK7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Using a flathead screwdriver, spudger, or large coin such as a quarter, remove the large 13mm screw on the bottom of the laptop.
- Take off the back panel.
Using a flathead screwdriver, spudger, or large coin such as a quarter, remove the large 13mm screw on the bottom of the laptop.
Take off the back panel.
1024
Step 2
- Locate the RAM near the center of the computer.
- Push gently on the metal pins that are on both sides of the RAM sticks.
- Before touching the RAM, discharge any built-up static by touching a metal surface or wearing an antistatic wrist strap.
Locate the RAM near the center of the computer.
Push gently on the metal pins that are on both sides of the RAM sticks.
Before touching the RAM, discharge any built-up static by touching a metal surface or wearing an antistatic wrist strap.
Step 3
- When you push on the pins, the RAM will pop up. Gently remove it from its socket.
- Repeat the third and fourth step for the second stick of RAM, located behind the first stick.
When you push on the pins, the RAM will pop up. Gently remove it from its socket.
Repeat the third and fourth step for the second stick of RAM, located behind the first stick.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Josiah Avery
Member since: 04/15/2015
131 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Cal Poly, Team 5-10, Maness Spring 2015
Member of Cal Poly, Team 5-10, Maness Spring 2015
CPSU-MANESS-S15S5G10
4 Members
6 Guides authored